lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 09-03-2015, 08:04 PM   #1
Not Yet Wild
 
Join Date: Aug 2015
Posts: 3
Default First cart, have a few questions

I bought a cart for transport at tractor shows ( both wife and mother are disabled and my knees suck ). The serial number is A9933 791023 I know it's a 99 48volt built in the 33rd week. Trying to figure out what kind of electrical system it uses? I also want to paint it but it has a lot of gouges in the body that need to be filled. I'm not sure if the bodies are plastic or fiberglass? I need to find a good filler. Another question I have is this cart has no run/tow switch that I've found if it runs out of battery power what is a safe way to move it? Thanks in advance Chuck

Last edited by 401jeeper; 09-03-2015 at 08:11 PM.. Reason: added another question
401jeeper is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 09-07-2015, 09:17 PM   #2
Member #16,745
 
jakesnake27's Avatar
Harley Davidson
 
Join Date: Aug 2009
Location: Missouri
Posts: 9,910
Default Re: First cart, have a few questions

to BGW

If it doesn't have a Run/Tow switch it's a series drive system. The body is a material that CC calls 'Armorflex' which is basically a stong plastic. To tow it, make sure the shifter is in neutral and key switch is off. Do not exceed 20 mph (to avoid overspinning the motor armature) and you will be fine.
jakesnake27 is online now   Reply With Quote
Unread 09-07-2015, 10:10 PM   #3
Gone Wild
 
theboss20's Avatar
Harley Davidson
 
Join Date: Jun 2014
Location: Buckeye, Az
Posts: 646
Smile Re: First cart, have a few questions

I just used some bondo type body filler on a cart I was working on and found that it was fairly easy to use. The key is mixing the correct amount of hardner and then get it as level with an applicator to make the job of sanding easier.
theboss20 is offline   Reply With Quote
Unread 09-08-2015, 02:18 PM   #4
Not Yet Wild
 
Join Date: Aug 2015
Posts: 3
Default Re: First cart, have a few questions

Thanks for the response. Are there any pros /cons to this system?
401jeeper is offline   Reply With Quote
Unread 09-16-2015, 03:04 PM   #5
Gone Wild
 
Frizbgolf's Avatar
Club Car
 
Join Date: Nov 2009
Location: Picayune, Mississippi
Posts: 692
Default Re: First cart, have a few questions

I have used P-Tex to fill in some gouges on my ds and it worked great. It is used by ski shops to fill in gouges on the bottom of skis. Just heat it up and it pours on like hotwax easy to sand and shape.
Frizbgolf is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
cart check out questions Electric EZGO
marathon questions, first cart Electric EZGO
New cart and questions Electric Club Car
Sat cart questions Star and Fairplay
first cart questions... Electric Club Car


All times are GMT -5. The time now is 01:35 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.