lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 09-23-2015, 07:47 PM   #1
Not Yet Wild
 
Join Date: Sep 2015
Posts: 2
Default Issue with Madjax Genesis 150

Hi, I just purchased a 2013 Precedent and had Genesis 150 rear flip seat installed. I have watched the two videos online and looked at the instructions for installation but cannot find the answer to my issues.

I am worried the brackets holding the seat backs are not properly installed. The front seat is raised about 2 inches higher than the normal stock seat location and is terribly uncomfortable. Furthermore, there are bolts installed into the top holes for the front seat but none in the lower holes. The holes in the bottom location on the seat bracket do not line up with the holes on the seat.

Thanks
mkmars01 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 09-23-2015, 11:06 PM   #2
Gone Wild
Club Car
 
Join Date: Jul 2015
Location: Alpharetta, GA
Posts: 226
Default Re: Issue with Madjax Genesis 150

Quote:
Originally Posted by mkmars01 View Post
Hi, I just purchased a 2013 Precedent and had Genesis 150 rear flip seat installed. I have watched the two videos online and looked at the instructions for installation but cannot find the answer to my issues.

I am worried the brackets holding the seat backs are not properly installed. The front seat is raised about 2 inches higher than the normal stock seat location and is terribly uncomfortable. Furthermore, there are bolts installed into the top holes for the front seat but none in the lower holes. The holes in the bottom location on the seat bracket do not line up with the holes on the seat.

Thanks
Here are three pictures I had on hand for a Genesis install. Granted these are the 250 with upgraded upper back seat, but the are assembled the same. I personally and not a fan of this design and it take longer to install and the instructions must have been writtin people with midget hands doing the installing as some of the parts are mind numbingly small to get to.

If this doesn't help, let me know and I will get you a person to speak with at Madjax about it.



cartattach is offline   Reply With Quote
Unread 09-24-2015, 07:23 AM   #3
Not Yet Wild
 
Join Date: Sep 2015
Posts: 2
Default Re: Issue with Madjax Genesis 150

Thanks for the response but the 250 has completely different brackets.
mkmars01 is offline   Reply With Quote
Unread 09-24-2015, 11:20 AM   #4
Gone Wild
 
Sergio's Avatar
Club Car
 
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 4,584
Default Re: Issue with Madjax Genesis 150

Quote:
Originally Posted by mkmars01 View Post
Thanks for the response but the 250 has completely different brackets.
Can You post a picture of your setup in question?

It is hard to visualize what you are describing.
Sergio is online now   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Anyone using a madjax lift Electric Club Car
Anyone Use the MADJAX lightbar? Electric Club Car
Madjax 3.5 Lift kit Electric Club Car
Madjax A arm kit Lifted Golf Carts


All times are GMT -5. The time now is 03:31 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.