lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 10-06-2015, 06:13 PM   #1
Gone Wild
 
Join Date: Jul 2015
Posts: 304
Default My club car DS brush guard sits too low. Is there a way to raise it up?

I had a brush guard mounted on my DS cart. But it sits too low and the corners rub the tires on bumps.

Is there a part available to lift it up to the correct height? It also sets lower than the headlights.

Jeffreynmandy is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 10-06-2015, 06:42 PM   #2
Gone Wild
 
Budule's Avatar
Club Car
 
Join Date: Sep 2010
Posts: 488
Default Re: My club car DS brush guard sits too low. Is there a way to raise it up?

That's a good looking cart right there...maybe show a pic from the front on how it mounts...
Budule is offline   Reply With Quote
Unread 10-06-2015, 07:44 PM   #3
Cave Dweller
 
Swan's Avatar
Club Car
 
Join Date: Apr 2013
Location: Always On The Move
Posts: 6,745
Default Re: My club car DS brush guard sits too low. Is there a way to raise it up?

you sure that is for a Club Car and not a Ezgo ? It looks like it bolted on the 2 bolts in the center of the bumper. you could either make a plate and use the 2 holes and then drill another set for the brush guard or use angle bracket on top of the bumper . I would use the first way myself .
Swan is offline   Reply With Quote
Unread 10-06-2015, 08:17 PM   #4
Gone Wild
 
Join Date: Jul 2015
Posts: 304
Default Re: My club car DS brush guard sits too low. Is there a way to raise it up?

A picture from the front

Jeffreynmandy is offline   Reply With Quote
Unread 10-06-2015, 08:38 PM   #5
Gone Wild
Club Car
 
Join Date: Apr 2015
Location: Athens, GA
Posts: 341
Default Re: My club car DS brush guard sits too low. Is there a way to raise it up?

I'm with Swan. Get a plate the same width as the one you have but twice the height. Drill 4 holes, two top for attaching to the existing plate and the bottom two to the bumper.

That is unless you have a welder, saw, etc....

Grainger sells small pieces of metal in lots of sizes/shapes. Also Lowes and Homedepot have a small selection.
klanel is offline   Reply With Quote
Unread 10-06-2015, 09:40 PM   #6
Old Sky Soldier
 
mrgolf's Avatar
Club Car
 
Join Date: Dec 2011
Location: Kentucky
Posts: 2,978
Default Re: My club car DS brush guard sits too low. Is there a way to raise it up?

The tires are too big for the brush guard

Sell that brush and get one that fits better. That would make you feel better in the long run.
mrgolf is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
G1 brush guard Gas Yamaha
DIY brush guard Electric Club Car
WANTED> 1992 Club Car DS Brush Guard Golf Carts and Parts
Still Looking For A Used Brush Guard Golf Carts and Parts
Brush guard ideas for 97 Club car Design Center


All times are GMT -5. The time now is 08:09 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.