lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 10-08-2015, 08:29 PM   #1
Gone Wild
 
wildandwonderfulprod's Avatar
 
Join Date: Dec 2011
Posts: 241
Default Solid-State-Converted Hunting Buggy "cutting in and out"

So i thought i could figure this one out on my own buy apparently not......

I have a 93 CC DS that I converted to Solid State using Scottyb's components. I have a 500 amp alltrax controller, heavy duty F&R, Heavy duty Solenoid and 2G cables. I also installed a D&D High Torque motor. Anyways, my cart has suddenly started "cutting in and out" when at full throttle. Might be cutting out at any throttle position, but ive only noticed it when im petal to the metal. I dont think its a battery cable issue because all of them seem tight at each battery, but I do have 2 batteries in the rear under a rear seat kit, so I cant say for certain. It just doesn't feel like its at the batteries. I have the PB-6 Throttle body, too. I have digital volt meter and when its cutting out its not dropping in voltage, nor is it cutting in and out on the meter either. I DON'T have the micro switch hooked up on my F&R but I DO have it hooked up on the PB-6. Any ideas?
wildandwonderfulprod is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 10-08-2015, 09:53 PM   #2
Cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 64,042
Default Re: Solid-State-Converted Hunting Buggy "cutting in and out"

This is the cart that was converted a couple of years ago? Do you hear the solenoid cut in and out when it stumbles?
What controller do you have?
scottyb is offline   Reply With Quote
Unread 10-09-2015, 03:28 AM   #3
Voltaholic
 
Revolution's Avatar
Mixed Breed
 
Join Date: Dec 2013
Location: Close to Navasota Texas
Posts: 933
Default Re: Solid-State-Converted Hunting Buggy "cutting in and out"

Since you have a volt meter installed, what is the voltage reading when the cart is "cutting out"?
Revolution is offline   Reply With Quote
Unread 10-09-2015, 09:13 AM   #4
Cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 64,042
Default Re: Solid-State-Converted Hunting Buggy "cutting in and out"

Quote:
Originally Posted by Revolution View Post
Since you have a volt meter installed, what is the voltage reading when the cart is "cutting out"?
I think he said pack voltage was unaffected by the cutting out.
scottyb is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
93 CC DS Solid State/Hunting Buggy Conversion Electric Club Car
Why "Carbon Fiber" "Wood grain" and Diamond Plated? Gas EZGO
How do you Interpret "State of Charge" ? Electric Club Car


All times are GMT -5. The time now is 08:10 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.