lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 10-15-2015, 01:46 PM   #1
Gone Wild
 
Join Date: Jan 2012
Location: California
Posts: 267
Default V-Glide to MCOR 4 conversion

Custom cart can"t find the serial # Club Car frame maybe early 95, V-Glide with 0-5k resistance signal , New AXE 4855 R8 controller, new batteries
Two previous posts about this cart:AXE controller not powering up (controller replaced) and Multi step pot rebuild. (jerky throttle response with new controller)

I looked at the conversion kit AM293201 but it states it will not work on the early 95 models with v-glide with 0-5k resistance signal.

Would the AM293201 kit work with this cart with the new controller set on 5k-0 resistance signal?
PuttPutt is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 10-15-2015, 04:29 PM   #2
Gone Wild
 
Join Date: Dec 2010
Posts: 458
Default Re: V-Glide to MCOR 4 conversion

If the wiring on the cart is for the 0-5k pot then that is a 2 wire pot and the MCOR is a 3 wire pot. May need a bit of harness adaption. David is sure to know the answer.
Golfdog is offline   Reply With Quote
Unread 10-15-2015, 06:13 PM   #3
Cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 64,069
Default Re: V-Glide to MCOR 4 conversion

Quote:
Originally Posted by Golfdog View Post
If the wiring on the cart is for the 0-5k pot then that is a 2 wire pot and the MCOR is a 3 wire pot. May need a bit of harness adaption. David is sure to know the answer.
Whoa. The AXE control is fully programmable and can be set for 2 or 3 wire 5k-0
scottyb is offline   Reply With Quote
Unread 10-15-2015, 06:19 PM   #4
Cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 64,069
Default Re: V-Glide to MCOR 4 conversion

Since you already have the AXE control and it is a well know fact they do not respond well to MCOR plan on making a signal reducer as Sergio posted some time ago. Or alternatively use a true potentiometer 0-5k and the control will be very smooth and customer happy.
scottyb is offline   Reply With Quote
Unread 10-15-2015, 08:08 PM   #5
Gone Wild
 
Join Date: Jan 2012
Location: California
Posts: 267
Default

pb 6 or pb 8. Scotty do you still have your plans from october 2007? Still sell the kit?
PuttPutt is offline   Reply With Quote
Unread 10-16-2015, 01:06 AM   #6
Dawg Gone Wild
 
TahoeDawgZ71's Avatar
Club Car
 
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 7,981
Default Re: V-Glide to MCOR 4 conversion

The MCOR4 conversion kit won't work with the 0-5K and it also won't work with the old style pedal linkage that your 1995 may have. I'd have to know the model number of your original controller to tell you for sure what you have. I'm with Scottyb on this one. Just get a potentiometer that works with your controller. The MCOR4 is a 3 wire setup and if you can set your controller up for a 2 wire, it would be much easier to do that if that's what the vehicle was originally setup for.
TahoeDawgZ71 is offline   Reply With Quote
Unread 10-16-2015, 08:34 AM   #7
Cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 64,069
Default Re: V-Glide to MCOR 4 conversion

Quote:
Originally Posted by PuttPutt View Post
pb 6 or pb 8. Scotty do you still have your plans from october 2007? Still sell the kit?
Only thing I have from 2007 is an old pick up truck
We sell solid state conversion kits.
And we sell the Gen5 throttle conversion kit with 0-5k pot for $388. This is a bolt on plug and play solution to throttle problems with a V-glide system.
email me if interested.
scottyb is offline   Reply With Quote
Unread 10-16-2015, 10:24 AM   #8
Gone Wild
 
Join Date: Jan 2012
Location: California
Posts: 267
Default

Thanks to all for the help. I'll send an email Scotty.


Sent from my iPhone using Tapatalk
PuttPutt is offline   Reply With Quote
Unread 10-26-2015, 11:54 PM   #9
Gone Wild
 
Join Date: Jan 2012
Location: California
Posts: 267
Default Re: V-Glide to MCOR 4 conversion

Installed the throttle conversion kit from Scotty today. Everything works great.
Very nice kit.

Thanks for the help.
PuttPutt is offline   Reply With Quote
Unread 10-27-2015, 12:22 AM   #10
Cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 64,069
Default Re: V-Glide to MCOR 4 conversion

Quote:
Originally Posted by PuttPutt View Post
Installed the throttle conversion kit from Scotty today. Everything works great.
Very nice kit.

Thanks for the help.
Thank you and your welcome. That pot is an infinite signal 0-5k. Is it smooth now ?
scottyb is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
MCOR conversion kit Electric Club Car
Problem with V-Glide to MCOR conversion Electric Club Car
MCOR Conversion kit? Electric Club Car
MCOR conversion? Electric Club Car
V-Glide to Mcor Conversion Electric Club Car


All times are GMT -5. The time now is 03:29 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.