lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 11-19-2015, 09:25 PM   #1
Not Yet Wild
 
Join Date: Nov 2012
Posts: 17
Unhappy Big mistake

I goofed. I have an 89 cc resistor and coils. I was rewiring to all cables to 4awg and snapped a terminal post in the vglide by over tightening. There's still enough post for the lug to stay on but no way to add a nut. Any suggestions on what to do? Maybe soldering? Thanks
longball1682 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 11-19-2015, 09:34 PM   #2
Dawg Gone Wild
 
TahoeDawgZ71's Avatar
Club Car
 
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 8,032
Default Re: Big mistake

We typically replace the V-Glide case assembly. It's available separately without having to buy the rest of the switch.
TahoeDawgZ71 is offline   Reply With Quote
Unread 11-19-2015, 09:58 PM   #3
Not Yet Wild
 
Join Date: Nov 2012
Posts: 17
Default Re: Big mistake

Is it possible to swap with one that isn't used? I may have enough post to hold it on without the terminal.
longball1682 is offline   Reply With Quote
Unread 11-19-2015, 10:58 PM   #4
Dawg Gone Wild
 
TahoeDawgZ71's Avatar
Club Car
 
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 8,032
Default Re: Big mistake

Yes. I wasn't referring to a used one. There are new ones available.
TahoeDawgZ71 is offline   Reply With Quote
Unread 11-20-2015, 12:13 AM   #5
Not Yet Wild
 
Join Date: Nov 2012
Posts: 17
Default Re: Big mistake

I just realized the order went nut/lug/nut. So I took the back nut out and have enough room to slide the lug on and secure it with a nut.
longball1682 is offline   Reply With Quote
Unread 11-20-2015, 06:25 AM   #6
Gone Wild
 
Budule's Avatar
Club Car
 
Join Date: Sep 2010
Posts: 488
Default Re: Big mistake

the bottom 2 are dead , just switch them around...
Budule is offline   Reply With Quote
Unread 11-20-2015, 08:04 AM   #7
Cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 64,093
Default Re: Big mistake

Quote:
Originally Posted by Budule View Post
the bottom 2 are dead , just switch them around...
That would work
scottyb is offline   Reply With Quote
Unread 11-20-2015, 11:09 AM   #8
Not Yet Wild
 
Join Date: Nov 2012
Posts: 17
Default Re: Big mistake

What about what I did (having the lug secured to the back by one nut but not between two nuts)? Will it melt anything or burn up the vglide?
longball1682 is offline   Reply With Quote
Unread 11-20-2015, 06:27 PM   #9
Gone Wild
Yamaha
 
Join Date: May 2012
Location: Rio Verde, Az
Posts: 2,684
Default Re: Big mistake

If you have a good solid connection then it should be ok.
Volt_Ampere is offline   Reply With Quote
Unread 11-20-2015, 07:10 PM   #10
Not Yet Wild
 
Join Date: Nov 2012
Posts: 17
Default Re: Big mistake

Thanks guys. Anyone want to buy it? I just got a great deal and bought a Tomberlin
longball1682 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
$700 mistake Electric Yamaha
won these by mistake Electric EZGO
Do not make the same mistake I did!!!!!! Electric EZGO
DCS is it a mistake Electric EZGO


All times are GMT -5. The time now is 11:54 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.