lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 12-16-2015, 04:13 PM   #1
Not Yet Wild
 
Join Date: Nov 2015
Posts: 5
Default 1998 CC Regen 2 - Installed New Controller, still no movement

BGW Family,

I have an older Regen 2 cart in the shop that I tested to have a failed controller. No output to activate the solenoid, but had 48V on Pins 1,2,4.

Long story short, I installed an Alltrax XCT300PDPlus, and still have the same issues. It's the first XCT I've installed on an PDPlus cart so I need some guidance.

Cart will barely move, if at all when in F or R and throttle pressed. Reverse buzzer ONLY works when throttle is pressed and F/R in R Tow/Run in Run. Controller only "registers" when throttle is pressed. I have it connected to the laptop, am running the ToolKit and the monitors only display info when the throttle is pressed. When you lift off the throttle, it's dead.

OBC is bypassed (White/Red jumped to Blue)
New Solenoid Installed, and clicks when throttle is pressed in F/R. Releases after 2 seconds of 0% throttle as it should.

Any Ideas?
AllSeasonCarts is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 12-16-2015, 11:04 PM   #2
Dawg Gone Wild
 
TahoeDawgZ71's Avatar
Club Car
 
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 8,002
Default Re: 1998 CC Regen 2 - Installed New Controller, still no movement

There are issues with the XCT controllers and the PD Plus systems. They don't play together well. I suggest either replacing the XCT with a DCX or converting the vehicle to the IQ system and getting an XCT IQ controller.
TahoeDawgZ71 is online now   Reply With Quote
Unread 12-17-2015, 10:08 AM   #3
Cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 64,079
Default Re: 1998 CC Regen 2 - Installed New Controller, still no movement

Call Alltrax tech support on this one and let us know what they say

What throttle mode have you got selected?
scottyb is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
1998 club car 48 v regen Electric Club Car
installed lift kit on 1998 ez-go workhorse Lifted Golf Carts
lift kit installed no movement Gas EZGO
1998 ez go regen DCS ITS problem, I think? Electric EZGO
1998 Club Car Regen//Dead End! Electric Club Car


All times are GMT -5. The time now is 10:34 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.