lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 12-20-2015, 09:30 AM   #11
Not Yet Wild
 
taken's Avatar
Club Car
 
Join Date: Jul 2015
Location: Western, MA
Posts: 26
Default Re: Odd quirk after switching to DPI charger

I see the same. Anything else I have to do wiring wise in conjunction with removing it?
taken is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 12-20-2015, 09:40 AM   #12
Gone Wild
 
Sergio's Avatar
Club Car
 
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 4,579
Default Re: Odd quirk after switching to DPI charger

You already did the other part which was running the negative from the charger receptacle directly to pack negative battery post.

You will need a new cable to go from pack negative to Controller B- if You remove the OBC as that cable is part of the OBC.
Sergio is offline   Reply With Quote
Unread 12-20-2015, 09:48 AM   #13
Not Yet Wild
 
taken's Avatar
Club Car
 
Join Date: Jul 2015
Location: Western, MA
Posts: 26
Default Re: Odd quirk after switching to DPI charger

OK, so bottom line. White and blue together on the plug I pull from the OBC. Then new 10 gauge from batt #6 neg to B- on controller. Done. Just want to make sure I have my head around this correctly. Thanks again for all your help!
taken is offline   Reply With Quote
Unread 12-20-2015, 09:58 AM   #14
Gone Wild
 
Sergio's Avatar
Club Car
 
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 4,579
Default Re: Odd quirk after switching to DPI charger

The 10ga wire goes from charger receptacle to negative of battery #6.

The pack negative is 6ga from factory, but on a Sepex system like your DS IQ, I would replace it with a 4ga cable.

Later if you upgrade the rest of the cables that one will be done already.

The only thing I am not sure on your DS is if there are other 10ga wires crimped on the same 5/16 lug as the pack negative cable on the controller B- terminal.
Sergio is offline   Reply With Quote
Unread 12-20-2015, 06:45 PM   #15
Gone Wild
 
teecro's Avatar
Club Car
 
Join Date: Jun 2014
Location: Sunset Bay, TN
Posts: 2,214
Default Re: Odd quirk after switching to DPI charger

Quote:
Originally Posted by Sergio View Post
... The OBC itself is what is going to sleep, controllers don't to that....
Always learning something new from you guys....
teecro is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
switching from 48v to 64v or 72v...questions... Extreme DC!
switching motors Electric Club Car
Switching from 36V Electric Yamaha
Switching from a Powerdrive II to a Lestronics charger. Electric Club Car
Help switching from 36 to 48 volt!! Electric Club Car


All times are GMT -5. The time now is 10:06 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.