lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 01-09-2016, 07:54 AM   #21
MC1
Getting Wild
 
Join Date: Dec 2015
Location: South Florida
Posts: 80
Default Re: wiring question

Quote:
Originally Posted by Sergio View Post

In Your case it may be a wiring problem with the flasher relay.
Maybe it's operating as designed. I'll try a new flasher relay just to see.

The front flashers/turn signals continue to flash when brake is applied, it's just the rears that do not flash when brakes are applied-but continue to flash after you release the brakes.

Brake light timer works as designed.
MC1 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 01-09-2016, 08:32 AM   #22
Gone Wild
 
Sergio's Avatar
Club Car
 
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 4,561
Default Re: wiring question

If You did not have the turn signal module on the steering wheel, the brake power would go directly to the rear bulbs white and yellow wires.

When You add the turn signal module to the steering column, the brake power no longer goes directly to the bulbs, it should just go to that module.

The turn signal module determines if and which of the 4 unique wires (Front: Green and Red, Rear: Yellow and White) get steady power or power that has been routed through the flasher module depending on its position.

Make sure the power coming out of the brake switch is not somehow wired directly to the brake light wires.
Sergio is online now   Reply With Quote
Unread 01-13-2016, 09:09 AM   #23
MC1
Getting Wild
 
Join Date: Dec 2015
Location: South Florida
Posts: 80
Default Re: wiring question

I'll recheck all the wiring connections at the brake switch (located under the floor). Seemed to be pretty straight forward when I installed the brake switch and timer.

Appreciate the info.
MC1 is offline   Reply With Quote
Unread 05-25-2016, 05:14 AM   #24
Not Yet Wild
Club Car
 
Join Date: May 2016
Location: central florida
Posts: 4
Unhappy Re: wiring question

Hello All,

Wiring question I can't figure out. Please help and pardon my stupidity but new to the cart world having recently purchased a 2007 CC DS. Has everlasting turn signal switch that came unlodged from column clamp. Aside from harness there was a white wire running to switch that came loose and turn signals no longer function. Took apart switch and found no evidence of where it may have been connected. From search on forum, seems to be a grounding wire but cant figure where to connect. Tried making contact in various places but no luck.

any suggestions or help will be greatly appreciated and I apologize for what is probably a real dumb question for some.

Not sure if this is hijacking and maybe this is supposed to be new thread? If so, newbie error.

Last edited by ccrob; 05-25-2016 at 05:30 AM.. Reason: not sure if this should be new thread?
ccrob is offline   Reply With Quote
Unread 05-25-2016, 07:16 AM   #25
Dazed & Confused
 
crash test dummy's Avatar
Club Car
 
Join Date: Nov 2011
Location: Z-HELLS FL
Posts: 14,021
Default Re: wiring question

Quote:
Originally Posted by ccrob View Post
newbie error.
yep it would be best to start a new thread
crash test dummy is online now   Reply With Quote
Unread 05-25-2016, 07:42 AM   #26
Not Yet Wild
Club Car
 
Join Date: May 2016
Location: central florida
Posts: 4
Default Re: wiring question

will do, thanks for the guidance.
ccrob is offline   Reply With Quote
Unread 03-07-2017, 08:29 PM   #27
Not Yet Wild
 
Join Date: Mar 2017
Posts: 2
Default Re: wiring question

I have a club car DS and my head lights and tail lights work but turn signals and brake lights don't what is it

Sent from my XT1080 using Tapatalk
garnhead is offline   Reply With Quote
Unread 03-07-2017, 08:39 PM   #28
Dazed & Confused
 
crash test dummy's Avatar
Club Car
 
Join Date: Nov 2011
Location: Z-HELLS FL
Posts: 14,021
Default Re: wiring question

Quote:
Originally Posted by garnhead View Post
I have a club car DS and my head lights and tail lights work but turn signals and brake lights don't what is it

Sent from my XT1080 using Tapatalk

..........
Welcome to BGW

you also should start a new thread
be sure you add your carts year and volts ... we will gladly help
crash test dummy is online now   Reply With Quote
Unread 03-08-2017, 11:49 AM   #29
Not Yet Wild
 
Join Date: Mar 2017
Posts: 2
Default Re: wiring question

It's a 2003 48 v club car DS

Sent from my XT1080 using Tapatalk
garnhead is offline   Reply With Quote
Unread 03-08-2017, 01:02 PM   #30
Gone Wild
 
theboss20's Avatar
Harley Davidson
 
Join Date: Jun 2014
Location: Buckeye, Az
Posts: 644
Smile Re: wiring question

The resistance for the LED bulbs is too low to trigger the flasher...need a zero resistance flasher designed for LED's or add resistors to each bulb to fool the flasher...😎
theboss20 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Wiring question-PDS Electric EZGO
Wiring question Electric EZGO
wiring question Electric EZGO
Wiring question Melex
wiring question Electric Club Car


All times are GMT -5. The time now is 12:14 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.