lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 01-07-2016, 07:12 PM   #1
Not Yet Wild
 
Join Date: Jan 2016
Posts: 17
Default 2010 CC Precedent Light Kit - Wiring to aftermarket reducer

So first post here, thanks for any insight upfront. I had been looking around at carts and jumped on a 2010 Precedent and got a steal on it. It came with the light kit, but did not work. I took the body off the cart the other day for paint, and while it was off, decided to see if I could diagnose the light issue. Apparently, there are several wires missing from the original harnesses (ground and positive). Not sure what in the world happened to the cart before i got it.

Now my question is, how would i wire the light kit to an aftermarket reducer (on it's way now)? On the headlight, there is a green and black for left turn signal, and red and black for right turn. the two headlamps are blue and black. am i correct so far? would i just wire the blue and black to the reducer (by way of a dist block and switch) for headlights? I have absolutely no use for turn signals and never will.

Would the tails set up the same way?

then, there is an orange and black pair that connects to nothing. what is this for?

Thanks everyone.
-Kevlar- is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 01-08-2016, 09:34 AM   #2
Not Yet Wild
 
Join Date: Jan 2016
Posts: 17
Default Re: 2010 CC Precedent Light Kit - Wiring to aftermarket reducer

No one?
-Kevlar- is offline   Reply With Quote
Unread 01-08-2016, 10:06 AM   #3
Not Yet Wild
 
Join Date: Jan 2016
Posts: 17
Default Re: 2010 CC Precedent Light Kit - Wiring to aftermarket reducer

Trying to post a pic for reference, but i guess i have to be a member for 7 days....
-Kevlar- is offline   Reply With Quote
Unread 01-08-2016, 10:34 AM   #4
Gone Wild
 
glassk's Avatar
Club Car
 
Join Date: Dec 2011
Location: Hampton, GA
Posts: 441
Default Re: 2010 CC Precedent Light Kit - Wiring to aftermarket reducer

https://www.youtube.com/watch?v=6FpblY6pAso
glassk is offline   Reply With Quote
Unread 01-08-2016, 10:43 AM   #5
Not Yet Wild
 
Join Date: Jan 2016
Posts: 17
Default Re: 2010 CC Precedent Light Kit - Wiring to aftermarket reducer

Quote:
Originally Posted by glassk View Post
Not only is that a DS, that's a gasser that already has a 12v battery. That doesn't help any of my questions, but thanks.
-Kevlar- is offline   Reply With Quote
Unread 01-08-2016, 10:54 AM   #6
Gone Wild
 
Sergio's Avatar
Club Car
 
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 4,579
Default Re: 2010 CC Precedent Light Kit - Wiring to aftermarket reducer

If You are good with electrical circuits, here is all of the information You will need.

There are really not any "universal" color conventions on the aftermarket light kits, but they are all very similar.

The 2010 Precedent does not come from factory with the "bucket harness", which is the harness that goes to the tail lights.

Study the diagrams below and follow the wires on your cart.

This wiring diagram will work for the OEM circuits of your cart:

http://www.buggiesgonewild.com/attac...mcor_small.jpg
Attached Images
File Type: jpg Precedent_Bucket_Harness_Wiring_Diagram.jpg (275.4 KB, 0 views)
File Type: jpg Precedent_Light_Kit_Wiring_Diagram.jpg (318.4 KB, 0 views)
Sergio is offline   Reply With Quote
Unread 01-08-2016, 11:06 AM   #7
Not Yet Wild
 
Join Date: Jan 2016
Posts: 17
Default Re: 2010 CC Precedent Light Kit - Wiring to aftermarket reducer

Quote:
Originally Posted by Sergio View Post
If You are good with electrical circuits, here is all of the information You will need.

There are really not any "universal" color conventions on the aftermarket light kits, but they are all very similar.

The 2010 Precedent does not come from factory with the "bucket harness", which is the harness that goes to the tail lights.

Study the diagrams below and follow the wires on your cart.

This wiring diagram will work for the OEM circuits of your cart:

http://www.buggiesgonewild.com/attac...mcor_small.jpg

that may help thanks. to my original question, can the blue and black wires be cut from the harness and tied directly to the aftermarket reducer? same with the tail lights?
-Kevlar- is offline   Reply With Quote
Unread 01-08-2016, 12:41 PM   #8
Not Yet Wild
 
Join Date: Dec 2015
Location: Rock Hill, SC
Posts: 43
Default Re: 2010 CC Precedent Light Kit - Wiring to aftermarket reducer

Hey Segio - do those drawings also apply to a 2007 Precedent? My cart came with an aftermarket light kit (I think it's a MadJax) and I'm curious about what is currently going to my dash because I'm thinking of adding a voltage reducer, fuse box, horn, etc...but I'd like to have a definitive reference for the existing wiring.

Thanks!
geonjay is offline   Reply With Quote
Unread 01-08-2016, 12:53 PM   #9
Gone Wild
 
Sergio's Avatar
Club Car
 
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 4,579
Default Re: 2010 CC Precedent Light Kit - Wiring to aftermarket reducer

The 2007 Precedent came from factory with the "bucket harness" installed and the connectors will match the ones in the MadJax diagram.

Use this wiring diagram for your 2007 Precedent cart:

http://www.buggiesgonewild.com/attac..._iq_wiring.jpg
Sergio is offline   Reply With Quote
Unread 01-08-2016, 02:09 PM   #10
Not Yet Wild
 
Join Date: Dec 2015
Location: Rock Hill, SC
Posts: 43
Default Re: 2010 CC Precedent Light Kit - Wiring to aftermarket reducer

THANK YOU!!!

I have another question. The diagram, on the right hand side, states "Change connection with lights but no DC to DC converter". I see that the lights DO connect to the OEM provided spade connection on the + terminal of battery 4 (W61) - does this mean the lights are only getting 36V? If I'm going to hook up a ScottyB LED meter, can I hook it up to the key switch and W40 (this drawing says purple, another drawing I have says it's Blk/Wh) - and get it powered? Is there anything carrying the full 48+ to the dash that would allow me to put the 48v->12v converter and fuse box in the front?
geonjay is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Where to mount voltage reducer on 2010 Precedent? Electric Club Car
48v to 12v reducer for 2010 Club car precedent Electric Club Car
Where to install ScottyB voltage reducer on 2010 Precedent Electric Club Car
2004 Precedent light wiring with reducer Electric Club Car
precedent light kit, Do i need a reducer? Electric Club Car


All times are GMT -5. The time now is 05:03 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.