01-12-2016, 09:41 AM | #1 |
Not Yet Wild
Join Date: Nov 2015
Posts: 20
|
Battery cables
I have new 2 ga battery cables and upgraded motor, controller, and 400 amp solenoid. Slight issue- the terminal end holes on end of cables are slightly too small for solenoid posts. I drilled the holes out to make the them fit, but this reduces metal around cable end hole. Is this an issue? Thanks.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-12-2016, 09:46 AM | #2 |
Old Sky Soldier
Join Date: Dec 2011
Location: Kentucky
Posts: 3,881
|
Re: Battery cables
Keep an eye on them, make sure they stay snug. If you only took a small amount they should work. If they seem to be getting hot, or getting loose, change them out.
|
01-12-2016, 10:18 AM | #3 |
Gone Wild
Join Date: Jun 2014
Location: Sunset Bay, TN
Posts: 2,390
|
Re: Battery cables
You drilled a 5/16" hole out to 3/8" right? Chances are that if you had the proper lugs and compared them along side each other the OD of the lug would have been the same....
|
01-12-2016, 10:42 AM | #4 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: Battery cables
We use both 5/16 and 3/8ths lugs in our cable sets. The 3/8ths lug has a slightly larger OD
|
|
|
Similar Threads | ||||
Thread | Forum | |||
New battery cables? | Electric EZGO | |||
4g battery cables with 2g motor cables | Electric EZGO | |||
G1 gas battery cables | Gas Yamaha | |||
battery cables cut g2a | Gas Yamaha | |||
1/0 Battery Cables to 6 AWG Motor Cables | Electric EZGO |