|01-13-2016, 04:50 PM||#1|
Join Date: Jun 2015
Location: Carolina Lowcountry
Running Wire Thru Top Supports
Thought I'd share an easy way to run wire thru top support brackets.
Drill holes in support large enough for the weight and wires.
Don't drill in bends, makes it hard to fish wire.
Crimp a split shot or 2 to a piece of nylon string.
(I used a ball bearing and epoxy cause it was closer.)
Drop shot in upper hole, feed string and let gravity do it's thing.
When the string comes out the other hole, remove shot and tape wire to string and pull wire back thru support.
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
|01-13-2016, 07:15 PM||#2|
friends call me Boke
Join Date: Apr 2008
Location: Smithfield, North Carolina
Re: Running Wire Thru Top Supports
I used a shop vac when I ran wires for my speakers on the other cart. Sucked a piece of string through and tied wire to it and pulled it back.
|Question on running wire from key switch to voltage reducer||Electric EZGO|
|48 volt three wire charger/2 wire syustem||Electric Club Car|
|What Gauge Wire for main hot wire coming off battery||Electric Club Car|
|2 wire charge meter hot wire to F&R witch?||Electric EZGO|
|Honda gx620 wire rectifire wire ????||Big Block Talk!|