lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 03-11-2016, 01:54 PM   #21
Gone Wild
 
Sergio's Avatar
Club Car
 
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 5,949
Default re: OBC Bypass ~ Technnical Tips

If You are referring to the powerDrive Plus Regen2 model below:
http://www.buggiesgonewild.com/attac...s_-regen2-.jpg
That is the one that You need to connect a fuse between the white and Blue wires on the OBC circuit.

Cut the White and Blue wires between the OBC and the 6-pin plug and add a fuse on those 2 wires on the harness side.

If You can, just cut the fuse holder that is on the OBC red wire and use that fuse holder to connect the white and blue wires together.

Just make sure all other unused pins are either removed from the OBC 6-pin connector as shown on the first posts, or put electrical tape on any cut wires to isolate them.
Sergio is online now   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 03-11-2016, 02:25 PM   #22
Gone Wild
Club Car
 
Join Date: Feb 2012
Location: Indio, CA The Desert!
Posts: 1,234
Default re: OBC Bypass ~ Technnical Tips

Sergio this diagram is what I was telling you this cart is in the middle of these two diagrams if you take the one that has the V Glide and you take the other drawing that has the potentiometer in it it's a combination of those it's more like the V Glide drawing but it has two solenoids and that coil. but it has the controller just like the V Glide drawing So based on that info what do you say
smokey tennis shoe is offline   Reply With Quote
Unread 03-11-2016, 02:42 PM   #23
Gone Wild
 
Sergio's Avatar
Club Car
 
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 5,949
Default re: OBC Bypass ~ Technnical Tips

Only the OLD T shaped Regen1 controller used the Negative on Yellow wire to provide the lockout.

If Your OBC has a White and a Blue wire, use the procedure that connects those wires together.
Sergio is online now   Reply With Quote
Unread 03-11-2016, 05:54 PM   #24
Gone Wild
Club Car
 
Join Date: Feb 2012
Location: Indio, CA The Desert!
Posts: 1,234
Default re: OBC Bypass ~ Technnical Tips

Sergio, ok i just did as you said. I joined the blue and white wires together and the cart now runs.

Thanks so much for all your help.
smokey tennis shoe is offline   Reply With Quote
Unread 03-30-2016, 07:24 AM   #25
Gone Wild
 
Jim C's Avatar
Club Car
 
Join Date: Oct 2008
Location: Wildwood, FL
Posts: 699
Default re: OBC Bypass ~ Technnical Tips

Just want to clarify, the tow/run switch will still work when the obc is removed?
Jim C is offline   Reply With Quote
Unread 03-30-2016, 07:50 AM   #26
Gone Wild
 
teecro's Avatar
Club Car
 
Join Date: Jun 2014
Location: Sunset Bay, TN
Posts: 2,251
Default re: OBC Bypass ~ Technnical Tips

Quote:
Originally Posted by Jim C View Post
Just want to clarify, the tow/run switch will still work when the obc is removed?
YES....
teecro is offline   Reply With Quote
Unread 03-30-2016, 10:14 PM   #27
Gone Wild
 
Join Date: Aug 2015
Posts: 151
Default re: OBC Bypass ~ Technnical Tips

Bypassed mine this week. Thanks to Tahoe Dawg for all his help.
Bigchief803 is offline   Reply With Quote
Unread 04-16-2016, 11:11 AM   #28
Not Yet Wild
E-Z-GO
 
Join Date: Jul 2010
Location: Canyon Lake
Posts: 2
Default re: OBC Bypass ~ Technnical Tips

Sir, are you talking about pulling the yellow wire out of the plug for the controller? Any help would be great. My cart was working then I decided to upgrade the controller. :(
nated is offline   Reply With Quote
Unread 04-16-2016, 03:44 PM   #29
Gone Wild
 
Sergio's Avatar
Club Car
 
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 5,949
Default re: OBC Bypass ~ Technnical Tips

All model years of the Series carts, the OBC provided the negative side for the Solenoid on the Yellow wire.
95-03 Series DS wiring Diagram
You need to run the Yellow wire that is connected to the solenoid small post directly to Controller B- or pack negative.

You need to run the black 10ga negative wire from the back of the charger receptacle directly to pack negative.
Sergio is online now   Reply With Quote
Unread 05-16-2016, 10:38 PM   #30
Not Yet Wild
 
Join Date: Sep 2013
Posts: 44
Default re: OBC Bypass ~ Technnical Tips

Can a DPI charger be used without bypassing the OBC for a short period time? Or does the bypass need to take place first? I have not tired the bypass yet but thought in the meantime I could use a charge on the batteries but don't want to mess things up.
Thanks
CTXBULL is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Bypassing Controller Electric Club Car
Bypassing OBC Electric Club Car
bypassing obc Electric Club Car
Bypassing the solenoid Electric Club Car
Bypassing the OBC on Precedent? Electric Club Car


All times are GMT -5. The time now is 06:41 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.