lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
 
Thread Tools Display Modes
Old 01-21-2016, 07:01 AM   #1
Sergio
Gone Wild
 
Sergio's Avatar
Club Car
 
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
Default OBC Bypassing

I think the White and Blue work better for all years IQ and Excel carts.

For the Regen-2 and other Model Years where the Blue wire was connected to the harness instead of the controller, the OBC provided power directly to the electrical system.
If the White and the Red/White wires going to the OBC are the same gauge, I would still use the White wire, but add a 10 amp inline fuse.

If the Red/White wire is a larger gauge, then use the Red/White on the OBC side of the connector and keep the fuse.

I like the idea of not having any power going to the Controller connector when the Tow/Run is on Tow (which is how the OBC works).

Using the Red wire would also provide non-fused 48v power at the controller connector.


The above information is for Sepex only systems.


All model years of the Series carts, the OBC provided the negative side of the Solenoid on the Yellow wire.

For the Series carts You just have to disconnect the Yellow wire from the OBC and run it directly from Solenoid to controller B- (or other negative source like pack negative).
Sergio is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 01-21-2016, 06:17 PM   #2
TahoeDawgZ71
revolutiongolfcars.com
 
TahoeDawgZ71's Avatar
Club Car
 
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
Default re: OBC Bypass ~ Technnical Tips

I'll add a little tip for those people who want to make this modification. I've often been asked what procedure is best used to make this modification. The OBC that is being bypassed has usually failed, creating the need to bypass it and use a standalone charger. Before you throw it in the trash, cut the 6 pin plug off of the old OBC, disassemble it and remove all of the unnecessary wires (Everything except the white and blue wires). Make a connection between the white and blue wires of the 6 pin plug. Butt connectors will work, but I prefer solder and heat shrink tubing. Plug the 6 pin connector back into the wire harness.
TahoeDawgZ71 is offline   Reply With Quote
Old 01-21-2016, 08:40 PM   #3
Sergio
Gone Wild
 
Sergio's Avatar
Club Car
 
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
Default re: OBC Bypass ~ Technnical Tips

I did not know this was going to be a sticky, so let me add a little more detail.

You also need to by-pass the OBC charging current control SCR by running the negative 10ga wire from the back of the charger receptacle directly to B- or pack negative.

The fuse is only needed on the Older Regen carts.

The IQ and Excel carts already have a fuse on the white wire before the Tow/Run switch.


I took a few pictures to illustrate David's comments about removing the unused pins from the 6-pin OBC connector.

Picture 1:
This is the Tab that locks the pins in place inside the OBC 6-pin connector, note the opening on the side of the Tab.
Picture 2:
To remove the Tab use a "pick" or a small screwdriver to slide under the opening and pull the Tab OFF the connector.
Picture 3:
Use a small screwdriver to move the individual pin locking tab to the side and pull the wire from the back to remove the pin OFF the connector.

Attached Images
File Type: jpg OBC_6pin_1.jpg (81.2 KB, 0 views)
File Type: jpg OBC_6pin_2.jpg (142.8 KB, 0 views)
File Type: jpg OBC_6pin_3.jpg (178.0 KB, 0 views)
Sergio is offline   Reply With Quote
Old 01-21-2016, 09:44 PM   #4
lockman1
What the ....?
 
lockman1's Avatar
Club Car
 
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,900
Default re: OBC Bypass ~ Technnical Tips

Quote:
Originally Posted by Sergio View Post
I did not know this was going to be a sticky...
Yeah, well... Scotty felt it was pertinent information, and I felt that the info you provide to BGW is well worth the sticky!

Carry on!

lockman1 is offline   Reply With Quote
Old 01-25-2016, 01:26 PM   #5
scooterman
Gone Wild
 
scooterman's Avatar
Club Car
 
Join Date: Jan 2014
Location: Lafayette, Louisiana
Posts: 1,677
Default re: OBC Bypass ~ Technnical Tips

The sticky may simplify the process when you get a 100 post from 100 different users wanting the same information. It is a handy tool commonly used in many forums for the same reasoning.
scooterman is offline   Reply With Quote
Old 02-29-2016, 11:27 AM   #6
jakesnake27
Gone Wild
 
Join Date: Aug 2009
Posts: 14,245
Default re: OBC Bypass ~ Technnical Tips

Should we change the title to "Bypassing Club Car IQ/Excel OBC"?
jakesnake27 is offline   Reply With Quote
Old 02-29-2016, 02:07 PM   #7
TahoeDawgZ71
revolutiongolfcars.com
 
TahoeDawgZ71's Avatar
Club Car
 
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
Default re: OBC Bypass ~ Technnical Tips

Quote:
Originally Posted by jakesnake27 View Post
Should we change the title to "Bypassing Club Car IQ/Excel OBC"?
It would definitely apply, the procedure is the same.
TahoeDawgZ71 is offline   Reply With Quote
Old 03-01-2016, 08:33 AM   #8
lockman1
What the ....?
 
lockman1's Avatar
Club Car
 
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,900
Default re: OBC Bypass ~ Technnical Tips

lockman1 is offline   Reply With Quote
Old 03-01-2016, 08:59 AM   #9
jakesnake27
Gone Wild
 
Join Date: Aug 2009
Posts: 14,245
Default re: OBC Bypass ~ Technnical Tips

Thanks Don!
jakesnake27 is offline   Reply With Quote
Old 03-01-2016, 10:18 AM   #10
scottyb
Happy Carting
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 73,356
Default re: OBC Bypass ~ Technnical Tips

Customer sent me a DIY video which is circulating the internet regarding OBC bypass. This video suggest connecting the 10g black charge lead directly to the Main neg battery terminal. Which is correct. Then they button the cart up without making any small wire alterations!??? Aren't they missing a critical part of the OBC bypass in this popular video?
scottyb is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Bypassing Controller Electric Club Car
Bypassing OBC Electric Club Car
bypassing obc Electric Club Car
Bypassing the solenoid Electric Club Car
Bypassing the OBC on Precedent? Electric Club Car


All times are GMT -5. The time now is 07:19 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.