Hook up 20" led light bar

mdoerrfeld@outlook.com

I want to hook up a 20" led light bar to a 36 volt club car- how do I wire it. I have a harness that has a connection from the battery to a relay with a white wire and another red and black wire to another battery hook up. There is a plug on the harness with 3 wires (I assume for switch) and two plugs dow the harness for two sets of lights.
I want to know how to hook it up. I do not have a toggle switch yet. Is a three prong plug common- Red, black and white plug. Any info would be great.

Matthew

BGW

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

_ogre

you won't get many replies with the limited information supplied
either post up more info or google ''12v relay wiring diagrams'' to understand them better
unless you bought a mondo watt 20'' led light bar, the relay probably is not needed

12 volt led lights typically run fine on 9 to 30 volts, i run mine on 2 batteries, 16 volts
i recommend a cheap marine headlight switch they are all brass and hold up better
look on ebay, they're cheaper than the stuff you buy at autozone, oreilleys or napa

this is the $15 switch i used, good for 15 amps, 180 watts

fishbooz

2 Attachment(s) electrical wiring help for 90 watt LED Light Bar

read through the above thread , it was a huge help for me

fishbooz

I could not get the thread link to post but you can find it using the search feature , lots of good info in there from Sergio and Crash Test Dummy