|01-30-2016, 12:42 PM||#1|
Not Yet Wild
Join Date: Jan 2010
Location: Middle Georgia
XCT400IQ Install Questions
I received my XCT400IQ Controller this week from ScottyB and am starting to get it installed. I have a few questions about the installation.
I attached a couple of pictures of the original mounting and the heat sink to look at. I am installing this on a 2004 Precedent. The plate that the controller mounts on has a large heat sink on the back side. All of the bolts in the picture of the original controller screw into the heat sink on the other side. I ordered XCT400IQ with the flex mount and the fan kit. The flex mount only matches to a couple of the available holes but the heat sink holes don't match the screws supplied with the flex mount. I suppose I could drill a few more holes and thread them for the new screws. What would you suggest? Your help/suggestions are appreciated.
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
|86 G1 Roof Top install questions||Gas Yamaha|
|G14, 16hp duromax install questions||Gas Yamaha|
|gx420 clone install questions||Clone Engine Swaps|
|stereo Install Questions||Electric EZGO|
|96 fe290 longblock install questions||Gas Club Car|