06 precedent help please

beemc · 02-23-2016, 08:30 AM

i bought a 06 48v club car precedent from an auction and it didn't have batteries so i put 4 12v batteries and the cart does nothing no solenoid click or anything i am getting + to one large post and one small post on solenoid but not getting a negative on the other small post any ideas on what to try ?

TahoeDawgZ71 · 02-23-2016, 09:50 AM

The on-board computer could be stuck in lockout mode. It happens from time to time and it almost always has to be replaced when this happens. There are also many other possible scenarios. If you care to talk about it feel free to call me at 706-836-7210. I'll walk you through some troubleshooting.

beemc · 02-23-2016, 12:48 PM

should there be a resistor on the solenoid ? there is not one

jakesnake27 · 02-23-2016, 02:26 PM

Quote:

Originally Posted by beemc

should there be a resistor on the solenoid ? there is not one

It depends on the controller. Does it have a stock Curtis 250 amp controller in it? You may have to remove a cover to see it...

Also,

to BGW

beemc · 02-23-2016, 04:30 PM

yes stock controller

jakesnake27 · 02-23-2016, 04:34 PM

Ok, I believe it should have a resistor on the solenoid. I will send you a private message (PM) when you get the PM privileges. Now that you have three posts, you should be able to receive them.

TahoeDawgZ71 · 02-23-2016, 05:08 PM

Yes it should have a pre-charge resistor.

beemc · 02-23-2016, 05:28 PM

would the missing resistor stop the cart from working ?

TahoeDawgZ71 · 02-23-2016, 08:02 PM

No. But a shorted controller can cause the resistor to heat up and become hot as fire, and possibly make somebody want to remove it. I'm thinking that's probably what happened. Locate the Onboard computer. It's directly under the tow/run switch and it has a 6 pin connector on the back of it that's plugged into the wire harness. Unplug the six pin connector and use a paperclip to jump the white wire to the blue wire within the wire harness connector. This will bypass the Onboard computer. If the vehicle operates you'll know that you need an onboard computer. If it doesn't we'll have to keep testing.

beemc · 02-23-2016, 08:24 PM

i did the obc bypass and still no luck what should i do next ?

02-23-2016, 08:30 AM	#1
beemc Not Yet Wild Join Date: Feb 2016 Posts: 29	06 precedent help please i bought a 06 48v club car precedent from an auction and it didn't have batteries so i put 4 12v batteries and the cart does nothing no solenoid click or anything i am getting + to one large post and one small post on solenoid but not getting a negative on the other small post any ideas on what to try ?
beemc Not Yet Wild Join Date: Feb 2016 Posts: 29

02-23-2016, 09:50 AM	#2
TahoeDawgZ71 revolutiongolfcars.com Join Date: Mar 2010 Location: Golf Car Capital of The World... Augusta, Georgia Posts: 10,224	Re: 06 precedent help please The on-board computer could be stuck in lockout mode. It happens from time to time and it almost always has to be replaced when this happens. There are also many other possible scenarios. If you care to talk about it feel free to call me at 706-836-7210. I'll walk you through some troubleshooting.

02-23-2016, 12:48 PM	#3
beemc Not Yet Wild Join Date: Feb 2016 Posts: 29	Re: 06 precedent help please should there be a resistor on the solenoid ? there is not one
beemc Not Yet Wild Join Date: Feb 2016 Posts: 29

02-23-2016, 04:30 PM	#5
beemc Not Yet Wild Join Date: Feb 2016 Posts: 29	Re: 06 precedent help please yes stock controller
beemc Not Yet Wild Join Date: Feb 2016 Posts: 29

02-23-2016, 04:34 PM	#6
jakesnake27 Gone Wild Join Date: Aug 2009 Posts: 14,245	Re: 06 precedent help please Ok, I believe it should have a resistor on the solenoid. I will send you a private message (PM) when you get the PM privileges. Now that you have three posts, you should be able to receive them.
jakesnake27 Gone Wild Join Date: Aug 2009 Posts: 14,245

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

02-23-2016, 05:08 PM	#7
TahoeDawgZ71 revolutiongolfcars.com Join Date: Mar 2010 Location: Golf Car Capital of The World... Augusta, Georgia Posts: 10,224	Re: 06 precedent help please Yes it should have a pre-charge resistor.

02-23-2016, 05:28 PM	#8
beemc Not Yet Wild Join Date: Feb 2016 Posts: 29	Re: 06 precedent help please would the missing resistor stop the cart from working ?
beemc Not Yet Wild Join Date: Feb 2016 Posts: 29

02-23-2016, 08:02 PM	#9
TahoeDawgZ71 revolutiongolfcars.com Join Date: Mar 2010 Location: Golf Car Capital of The World... Augusta, Georgia Posts: 10,224	Re: 06 precedent help please No. But a shorted controller can cause the resistor to heat up and become hot as fire, and possibly make somebody want to remove it. I'm thinking that's probably what happened. Locate the Onboard computer. It's directly under the tow/run switch and it has a 6 pin connector on the back of it that's plugged into the wire harness. Unplug the six pin connector and use a paperclip to jump the white wire to the blue wire within the wire harness connector. This will bypass the Onboard computer. If the vehicle operates you'll know that you need an onboard computer. If it doesn't we'll have to keep testing.

02-23-2016, 08:24 PM	#10
beemc Not Yet Wild Join Date: Feb 2016 Posts: 29	Re: 06 precedent help please i did the obc bypass and still no luck what should i do next ?
beemc Not Yet Wild Join Date: Feb 2016 Posts: 29

Similar Threads
Thread	Forum
Club Car Precedent Dual Action Heavy Duty Overload Leaf Spring For CC Precedent	Electric Club Car