|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
03-04-2016, 05:28 PM | #1 |
Gone Wild
Join Date: Mar 2013
Posts: 307
|
Changing out front spindles
I am sure someone has probably asked this, but I am changing my spindles out on the front of my Club Car. How do I go about getting the hub off the old spindles?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-04-2016, 05:41 PM | #2 |
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: Changing out front spindles
I'm assuming you're working on a Precedent. Once you take off the retaining nut it should slide right off easily. If it doesn't, the bearing is rusted to the spindle and it may take a little persuasion with a hammer. Be careful not to damage the spindle when you're beating the hub off. Sand the rust down and make it nice and smooth before you re-install the new hub and it should slide on very easily.
|
03-04-2016, 05:45 PM | #4 |
Gone Wild
Join Date: Mar 2013
Posts: 307
|
Re: Changing out front spindles
Mine does not have the retaining nut with the cotter pin.
|
03-04-2016, 05:48 PM | #5 |
Guest
Posts: n/a
|
Re: Changing out front spindles
then follow daves removal
note always give make , model & year of cart when posting |
03-04-2016, 06:43 PM | #6 |
Gone Wild
Join Date: Mar 2013
Posts: 307
|
Re: Changing out front spindles
Ok, it took some time to get the hub off. Gotta love rusted on nuts that go to the steering arm.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
g1 front knuckle spindles? | Golf Carts and Parts | |||
Front spindles | Gas EZGO | |||
WTB 89-up front spindles!! Asap | Golf Carts and Parts | |||
WTB cc newer front spindles and hubs | Golf Carts and Parts | |||
2003 TXT front spindles | Gas EZGO |