lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 03-04-2016, 07:52 PM   #1
Not Yet Wild
Club Car
 
Join Date: Aug 2013
Location: Northport, Alabama
Posts: 19
Default Wiring reversed, means what?

As determined, my alltrax controller went out on my club car IQ.

In replacing it with another one, I see where the A2 of the motor was hooked to the M- of controller.

The A1 of the motor was hooked to the B+ of the controller with the battery + from the solenoid being hooked to B+ of controller.

F2 of motor hooked to F2 of controller,
and F1 of motor hooked to F1 of controller.

I've been running it like this for 3 plus years.



Cliffs: A1 and A2 off motor hooked up backwards to controller does what?

God Bless,
David B.

Last edited by BOFF; 03-04-2016 at 07:54 PM.. Reason: typo
BOFF is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 03-04-2016, 08:12 PM   #2
Cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 64,063
Default Re: Wiring reversed, means what?

A1 and A2 can swap without adverse effect
scottyb is offline   Reply With Quote
Unread 03-04-2016, 08:21 PM   #3
Not Yet Wild
Club Car
 
Join Date: Aug 2013
Location: Northport, Alabama
Posts: 19
Default Re: Wiring reversed, means what?

Quote:
Originally Posted by scottyb View Post
A1 and A2 can swap without adverse effect
Thank you scottyb!

God Bless,
David B.
BOFF is offline   Reply With Quote
Unread 03-04-2016, 09:11 PM   #4
Gone Wild
Yamaha
 
Join Date: May 2012
Location: Rio Verde, Az
Posts: 2,681
Default Re: Wiring reversed, means what?

It will reverse direction. (swapping either A1 and A2 or F1 and F2) My new motor went backwards with the connections the way they were labeled so I just swapped F1 and F2.
Volt_Ampere is offline   Reply With Quote
Unread 03-08-2016, 03:41 PM   #5
Not Yet Wild
Club Car
 
Join Date: Aug 2013
Location: Northport, Alabama
Posts: 19
Default Re: Wiring reversed, means what?

Quote:
Originally Posted by Volt_Ampere View Post
It will reverse direction. (swapping either A1 and A2 or F1 and F2) My new motor went backwards with the connections the way they were labeled so I just swapped F1 and F2.
Programmed the controller today.

It's obvious the motor is running backward, as I have it programmed 40% backwards direction, and the cart is moving backwards fast, and forward slow.

Do I swap out the A 1 and 2, the F1 and 2, or the wires on the direction switch?

Thanks in advance.

God Bless,
David B.
BOFF is offline   Reply With Quote
Unread 03-08-2016, 03:43 PM   #6
Cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 64,063
Default Re: Wiring reversed, means what?

Yes, simply swap F1 and F2 wherever they are easiest to reach, at the motor or at the control. Be sure to put run/tow switch in tow beforehand.
scottyb is offline   Reply With Quote
Unread 03-08-2016, 03:53 PM   #7
Not Yet Wild
Club Car
 
Join Date: Aug 2013
Location: Northport, Alabama
Posts: 19
Default Re: Wiring reversed, means what?

Thank you scottyb.

I hooked the reverse buzzer back up. This is s hunting cart. It still continuously buzzes either in reverse, forward, neutral.

It buzzes on, off, on, off, like it's giving codes.

What's up with this?

God Bless,
David B.
BOFF is offline   Reply With Quote
Unread 03-08-2016, 04:42 PM   #8
Cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 64,063
Default Re: Wiring reversed, means what?

What kind of a controller are you asking about?
scottyb is offline   Reply With Quote
Unread 03-08-2016, 05:28 PM   #9
Not Yet Wild
Club Car
 
Join Date: Aug 2013
Location: Northport, Alabama
Posts: 19
Default Re: Wiring reversed, means what?

It had an alltrax dcx 600 that went bad after I charged the cart. Replaced it with an alltrax xct 48500iq. Buzzer was doing same thing with controller which was bad, as it is now. I never noticed it though, due to being unhooked.

Cart seems to be driving fine though. No condensation on the three blades of switch, or the three prong plug.

God Bless,
David B.
BOFF is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Made in America, means better quality Clone Engine Swaps
forward and reverse.....reversed Electric EZGO
Reversed, forward and dead Electric Club Car
Bigger Tires Means More Upgrades? Electric EZGO
Will somebody please tell me what this sticker means? Electric Club Car


All times are GMT -5. The time now is 03:54 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.