|03-22-2016, 03:28 PM||#1|
Join Date: Nov 2011
Curtis 906 reset problem
Replaced the OBC on a friend's cart. Prior to the OBC replacement the Curtis meter was working properly. After the OBC reset the gauge showed 2 bars. I read the spec sheet about the gauge automatically resetting when the proper reset voltage is applied. It would not reset when on the charger.
I put a power supply on the meter, ran it up to about 60 volts and let in go for about 6 minutes or so. The gauge reset properly. Put it back in the dash and it worked OK for a couple of days. Now it is back to the 2 bar charge indication. I'm trying to figure out how replacing the OBC had any effect on the Curtis gauge.
Anyone experience the same issue?
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
|Curtis Handheld 1313 4401 problem||Electric Club Car|
|Curtis 1268 problem||Lifted Golf Carts|
|club car/curtis speed controller problem / ?||Electric Club Car|
|OBC reset problem||Electric Club Car|
|Reset On Board Computer, Charging Problem||Extreme DC!|