Circuit Priority On Rewire jobs

yeznatea · 01-10-2009, 08:52 AM

You guy's who have done a complete rewire job, Did you have any thing that you installed first to ease the job . Or just One wire at a time. I using #4 gage wire and the wire that goes through the OBC will have to be changed to will this effect the OBC opperation?

roady89 · 01-10-2009, 08:56 AM

Mount all the components in first....like batts, motor, F/R switch, controller....everything you can. Then wire one at a time. Keep in mind other cables. When your cutting cables for the batts keep in mind you will have to remove the caps to fill with water so make sure you have enough cable you can get the caps off. Try and wire it as clean as you can. Use zip ties to hold things out of the way.

The 4 guage will not effect the OBC at all. You have to put the cable through the hole first before you put the end on.

scottyb · 01-10-2009, 08:56 AM

I wire primary 1st and secondary 2nd. Lights and accessories last.

yeznatea · 01-10-2009, 09:00 PM

Thanks for the info, Things going really well. Mabey Tuesday I'll get to ride if it passes the smoke check Al

01-10-2009, 08:52 AM	#1
yeznatea Not Yet Wild Join Date: Nov 2008 Posts: 11	Circuit Priority On Rewire jobs You guy's who have done a complete rewire job, Did you have any thing that you installed first to ease the job . Or just One wire at a time. I using #4 gage wire and the wire that goes through the OBC will have to be changed to will this effect the OBC opperation?
yeznatea Not Yet Wild Join Date: Nov 2008 Posts: 11

01-10-2009, 08:56 AM	#2
roady89 nimda Join Date: Jun 2007 Posts: 13,022	Re: Circuit Priority On Rewire jobs Mount all the components in first....like batts, motor, F/R switch, controller....everything you can. Then wire one at a time. Keep in mind other cables. When your cutting cables for the batts keep in mind you will have to remove the caps to fill with water so make sure you have enough cable you can get the caps off. Try and wire it as clean as you can. Use zip ties to hold things out of the way. The 4 guage will not effect the OBC at all. You have to put the cable through the hole first before you put the end on.
roady89 nimda Join Date: Jun 2007 Posts: 13,022

01-10-2009, 08:56 AM	#3
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,401	Re: Circuit Priority On Rewire jobs I wire primary 1st and secondary 2nd. Lights and accessories last.

01-10-2009, 09:00 PM	#4
yeznatea Not Yet Wild Join Date: Nov 2008 Posts: 11	Re: Circuit Priority On Rewire jobs Thanks for the info, Things going really well. Mabey Tuesday I'll get to ride if it passes the smoke check Al
yeznatea Not Yet Wild Join Date: Nov 2008 Posts: 11

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Similar Threads
Thread	Forum
Very Cool Custom Paint Jobs	Body and Paint
2000 Charging Circuit Diagram	Electric EZGO