lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 04-23-2016, 12:49 AM   #11
Cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 64,079
Default Re: Eratic F/R after new F/R switch install

I would not know what your options are unless I could see the switch
scottyb is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 04-23-2016, 10:29 AM   #12
Getting Wild
 
Join Date: Sep 2010
Posts: 138
Default Re: Eratic F/R after new F/R switch install

Try to get a shot today, but installed. The bottom line is, when the cam rotates, it's supposed to stop (hit the base) at a point where the cam contacts are in perfect alignment with the main contacts. In my case, the cam rotates too far (clockwise and anti-clockwise) so the cam contacts pass those optimum spots.

If I rotate the cam less than full rotation, the contacts line up.
scrannel is offline   Reply With Quote
Unread 04-23-2016, 04:37 PM   #13
Gone Wild
 
theboss20's Avatar
Harley Davidson
 
Join Date: Jun 2014
Location: Buckeye, Az
Posts: 646
Smile Re: Eratic F/R after new F/R switch install

Buy one from SCOTTYB and you will get a quality switch.
theboss20 is offline   Reply With Quote
Unread 04-23-2016, 05:00 PM   #14
Cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 64,079
Default Re: Eratic F/R after new F/R switch install

If the problem is over rotation of the center cam then you could build up the stop to stop the cam where it is aligned.
scottyb is offline   Reply With Quote
Unread 04-23-2016, 08:08 PM   #15
Getting Wild
 
Join Date: Sep 2010
Posts: 138
Default Re: Eratic F/R after new F/R switch install

Quote:
Originally Posted by scottyb View Post
If the problem is over rotation of the center cam then you could build up the stop to stop the cam where it is aligned.
Yes, I shimmed the stop area on both sides and all's well. Not a cheaply produced device, weirdly just badly designed. Wasn't off by much, but a miss is a miss. Thanks for the help.
scrannel is offline   Reply With Quote
Unread 04-23-2016, 08:26 PM   #16
Cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 64,079
Default Re: Eratic F/R after new F/R switch install

Ok, keep an eye on it and keep us posted.
scottyb is offline   Reply With Quote
Unread 04-23-2016, 10:11 PM   #17
Getting Wild
 
Join Date: Sep 2010
Posts: 138
Default Re: Eratic F/R after new F/R switch install

Will do!
scrannel is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
New Switch Install Assistance Gas Club Car
brake switch install Electric Club Car
Want to install a Tow Switch/Kill Switch Design Center
eratic spark in 1989 ez go Gas EZGO
What to do with Run/Tow Switch after controller install Electric EZGO


All times are GMT -5. The time now is 07:36 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.