|05-24-2016, 12:53 PM||#1|
Not Yet Wild
Join Date: Mar 2016
2012 Precedent. Get in turn key, get reverse buzz but won't go. This happens in forward and reverse. This does not happen all the time. I have cycled the reverse switch and the key switch several time then it will go. Were should I start looking for the issue? Thanks for your help.
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
|05-24-2016, 02:03 PM||#3|
Join Date: Sep 2012
Location: Charlotte, NC
Re: won't go
It sounds like the typical failure of the MCOR micro-switch.
The best way to eliminate it is to disconnect the 2-pin Deutsche connector from the MCOR and install a large paper clip in the harness connector.
If the problem goes away, the MCOR is the problem.