05-25-2016, 10:44 PM | #1 |
Gone Wild
Join Date: May 2016
Posts: 373
|
Body Rattle
Aight guys. Just put a 3" Jakes on my DS, with some 20" Super Lugs on the back. The body around the bag well shakes and makes more noise than I care for, this is a hunting setup. Any suggestions on how to quiet this?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-25-2016, 10:50 PM | #2 |
Gone Wild
Join Date: May 2015
Location: Houston
Posts: 903
|
Re: Body Rattle
Foam rubber tape adhered to specific areas below body cowling.
|
05-25-2016, 11:14 PM | #3 |
Gone Wild
Join Date: May 2016
Posts: 373
|
Re: Body Rattle
Your saying put this directly below the area? Seems like I need to shore something up
|
05-26-2016, 12:06 AM | #4 |
Guest
Posts: n/a
|
Re: Body Rattle
check your bushings
|
05-26-2016, 06:57 PM | #5 |
Gone Wild
Join Date: May 2016
Posts: 373
|
Re: Body Rattle
Changed all the bushings and front bearings during the lift. The front leaf spring bolts on the rear were a **** beast to get out! Like they were welded in there!
It's the bagwell area that shakes and rattles. Also the top, which is coming off. |
05-26-2016, 07:13 PM | #6 |
Guest
Posts: n/a
|
Re: Body Rattle
are the push pins all in place in the bagwell area ?
|
05-26-2016, 07:20 PM | #7 |
Gone Wild
Join Date: May 2016
Posts: 373
|
Re: Body Rattle
Yep, but after further inspection just now, it's because those pins are loose the lil black cover is what's shaking around. Thanks for the replies, ima tighten her up
|
05-26-2016, 07:57 PM | #8 |
Guest
Posts: n/a
|
Re: Body Rattle
|
|
|
Similar Threads | ||||
Thread | Forum | |||
rattle | Electric EZGO | |||
Rattle | Electric EZGO | |||
rattle can or no-rattle can | Body and Paint | |||
to rattle can..... | Body and Paint | |||
G2 rattle | Gas Yamaha |