Handle HELP!!!

Mose · 06-09-2016, 07:07 PM

Either this thing is rusted on or I'm missing something. Trying to change F/R switch on 1987 36v DS. I've removed the screw in front, pulled, liquid wrench, tapped, beat..... Do I need to knock the roll pin out? I'm missing something

06-09-2016, 07:33 PM

should be 3 screws and handle screw

marked in red

Mose · 06-09-2016, 07:45 PM

I guess it's seized up. Thanks for the diagram. I'll add more liquid wrench and try again.

06-09-2016, 08:01 PM

i have never had one not fall off in my hand after removing screws
can you post photos of front and back ??

Mose · 06-09-2016, 08:36 PM

Will post pics in the morning

larrybi · 06-10-2016, 06:41 AM

try using PB Blaster

Mose · 06-10-2016, 07:12 AM

I will try some PB after work. If that don't work it might be sawzall time.:

Mose · 06-10-2016, 07:14 AM

Other side

mgray70 · 06-10-2016, 08:13 AM

I've had to cut, bust, chisel, several of those off on most of my builds. They are not real expensive. Less than $10 on flea Bay.

06-10-2016, 10:14 AM

you may have to cut the head off the top screw

06-09-2016, 07:07 PM	#1
Mose Not Yet Wild Join Date: Jul 2015 Posts: 20	Handle HELP!!! Either this thing is rusted on or I'm missing something. Trying to change F/R switch on 1987 36v DS. I've removed the screw in front, pulled, liquid wrench, tapped, beat..... Do I need to knock the roll pin out? I'm missing something
Mose Not Yet Wild Join Date: Jul 2015 Posts: 20

06-09-2016, 07:45 PM	#3
Mose Not Yet Wild Join Date: Jul 2015 Posts: 20	Re: Handle HELP!!! I guess it's seized up. Thanks for the diagram. I'll add more liquid wrench and try again.
Mose Not Yet Wild Join Date: Jul 2015 Posts: 20

06-09-2016, 08:01 PM	#4
crash test dummy Guest Posts: n/a	Re: Handle HELP!!! i have never had one not fall off in my hand after removing screws can you post photos of front and back ??
crash test dummy Guest Posts: n/a

06-09-2016, 08:36 PM	#5
Mose Not Yet Wild Join Date: Jul 2015 Posts: 20	Re: Handle HELP!!! Will post pics in the morning
Mose Not Yet Wild Join Date: Jul 2015 Posts: 20

06-10-2016, 06:41 AM	#6
larrybi Not Yet Wild Join Date: May 2016 Posts: 69	Re: Handle HELP!!! try using PB Blaster
larrybi Not Yet Wild Join Date: May 2016 Posts: 69

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

06-10-2016, 08:13 AM	#9
mgray70 Gone Wild Join Date: Apr 2013 Location: Deep Run, NC Posts: 2,544	I've had to cut, bust, chisel, several of those off on most of my builds. They are not real expensive. Less than $10 on flea Bay.

Similar Threads
Thread	Forum
fnr handle	Electric EZGO
Shifter handle	Members Rides
G2 F/R handle	Gas Yamaha
F-N-R handle	Gas Club Car
F/R Handle	Gas Yamaha