|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
07-16-2016, 08:10 AM | #1 |
Not Yet Wild
Join Date: May 2016
Posts: 69
|
Point me in the right direction
I have a 96 CC ds Series 48 volt cart, with a 6" axle lift and 23" tires and 14" rims. I need to get more torque out of it and was wondering if this is the way to go. I DO NOT need more speed just pulling power.
1. replace the FNR switch 2. replace all wiring and go to #2 gauge 3. replace the original controller with a 500A controller 4. replace the solenoid with a heavy duty one????? I use this cart for night hog hunting so speed is not an issue just pulling hills, it's not used off road mainly scouting fields and traveling logging roads. Any advice any one could offer would be greatly appreciated. I'm sure there is something I have left out in the way of information, if so chime in and let me know, I don't want to waste money trying to figure this out on my own. thanks for you advise |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-16-2016, 08:36 AM | #2 |
Cave Dweller
Join Date: Apr 2013
Location: Always On The Move
Posts: 22,232
|
Re: Point me in the right direction
yes that is the way to go , other then a torque motor there is nothing left to do
|
07-16-2016, 09:13 AM | #3 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: Point me in the right direction
You are on the right track
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Point me in the right direction for troubleshooting | Electric EZGO | |||
3 Years to this point | Garage and Workshop | |||
3 point harness | Golf Carts and Parts | |||
Point me in the right direction Please | Electric EZGO |