lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
 
Thread Tools Display Modes
Old 07-20-2016, 01:14 PM   #1
81 club car guy
Not Yet Wild
Club Car
 
Join Date: Mar 2016
Location: Romeo, Michigan
Posts: 8
Default Wiring Detail from Micro Switche(s) to Driver side Solenoid

Need help and I need a better Wiring diagram for 81 Club Car Elec. From inside the speed controller - regarding the 3 Terminal Micro Switch my question is" does the wire from the FWD REV switch brass post route to the bottom terminal on the micro switch Or does Buzzer wire get routed to bottom terminal on micro switch? I know the top terminal wire is yellow and is routed to each of the micro switches within.

2nd part of my question - does anyone have pics on how the Driver side solenoid terminals are wired. Diagram is not clear enough,, I know the Forward and Reverse limit micro switch wire goes to the driver side solenoid, and so does the 3 terminal micro switch wire, and the motor wire lead... I'm just trying to do it right. Everyone thank you!
Attached Images
File Type: jpg Microswitch wiring 81 Club Car.jpg (171.1 KB, 0 views)
81 club car guy is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 07-20-2016, 02:04 PM   #2
rib33024
......................
 
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
Default Re: Wiring Detail from Micro Switche(s) to Driver side Solenoid

Is this what your looking for



rib33024 is offline   Reply With Quote
Old 07-20-2016, 02:20 PM   #3
Sergio
Gone Wild
 
Sergio's Avatar
Club Car
 
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
Default Re: Wiring Detail from Micro Switche(s) to Driver side Solenoid

The buzzer gets wired to the bottom (Normally Closed) position of the switch so buzzer only makes sound when pedal is up.

The limit switch at the FNR provides the "negative" coil side to all of the solenoids.

The limit switches inside the Speed box provide the positive coil side to each of the solenoids.

The motor cable connects to the big post on the solenoid.

All of the small gauge wires connect to the small posts only.

The attached diagram should show it more clearly.
Attached Images
File Type: jpg 1981-1984_Club_Car_DS.jpg (710.5 KB, 0 views)
Sergio is offline   Reply With Quote
Old 07-21-2016, 04:31 AM   #4
81 club car guy
Not Yet Wild
Club Car
 
Join Date: Mar 2016
Location: Romeo, Michigan
Posts: 8
Default Re: Wiring Detail from Micro Switche(s) to Driver side Solenoid

You guys Thank You for the clearer pics, I appreciate your help..
81 club car guy is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
driver side lean Electric EZGO
Driver side solenoid Electric Club Car
WTB - G22 Driver side Headlight... Golf Carts and Parts
WTB: G1 driver side axle Golf Carts and Parts
Passanger side Brake grabbing more than Driver side Electric Club Car


All times are GMT -5. The time now is 03:00 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.