|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
08-04-2016, 12:47 PM | #1 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
EMP 2 speed not working in high
I have a used EMP LR5 2 speed motor installed in 2002 DS (series) Motor came to me with OEM 6g cable from LR1 to LR2 terminals and it ran fine in low speed as designed.
I downloaded this instruction from EMP for the 2 spd CC F&R install here > http://empinc.biz/faq/directions-for...-5-x-sf-models I have only low speed, no hi speed. Low speed works as shown in the illustration but when selector is moved to opposite side I get nothing? I tested switch to insure continuity was present between all contacts as designed in both positions. I traced my cables 3 times. I verified the model # and the diagram has the same model #. What am I missing? What did I do wrong? Thanks on advance for any help. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-04-2016, 08:59 PM | #2 |
Not Yet Wild
Join Date: Aug 2009
Posts: 59
|
Re: EMP 2 speed not working in high
Have you tried to hardwire it in high speed mode and bypass the switch?
|
08-04-2016, 09:09 PM | #3 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: EMP 2 speed not working in high
|
08-04-2016, 09:34 PM | #4 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: EMP 2 speed not working in high
Awhhh, crap. I was hoping this wasn't the case but high speed not working wired as shown in instruction.
Thanks for your help Dart. |
08-04-2016, 09:47 PM | #5 |
Not Yet Wild
Join Date: Aug 2009
Posts: 59
|
Re: EMP 2 speed not working in high
No problem, sometimes it's the simple things. Unless it's mine, then it's complicated.
|
08-04-2016, 10:00 PM | #6 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: EMP 2 speed not working in high
I suspected as much initially but i hoped for an error.
We will see what EMP has to offer. I've had this cart and this motor for years - wanting to put them together. |
08-05-2016, 11:18 AM | #7 |
Just Gone
Join Date: Sep 2015
Location: North Carolina
Posts: 3,549
|
Re: EMP 2 speed not working in high
I was hoping Hypersprint would see this. I know he has a 2 speed emp motor paired with a 2 speed rear end if I'm not mistaken, but glad you found the problem anyway.
|
08-05-2016, 11:35 AM | #8 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: EMP 2 speed not working in high
I am too hoping somebody with some practical knowledge of this switching system will reply.
Meanwhile I'm waiting for an email reply from EMP. |
|
|
Similar Threads | ||||
Thread | Forum | |||
D&D PDS High Speed Motor and 8:1 High Speed Gear Experiment... | Electric EZGO | |||
Top Speed with high speed gear and D&D Torque Motor | Electric EZGO | |||
PDS II, slow speed and high speed gears | Electric EZGO | |||
high speed gears with emp 2 speed, advice please | Electric EZGO | |||
1985 G1 Runs fine low speed , high speed run for a mile then fall on its face | Gas Yamaha |