lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 08-23-2016, 07:28 PM   #21
Dawg Gone Wild
 
TahoeDawgZ71's Avatar
Club Car
 
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 7,614
Default Re: Upgrade Advice

Quote:
Originally Posted by Ribber View Post
jlutsey, I sent you a PM.

TD, he says his controller is 5k-0 ohms, so it will work?
Alltrax AXE 400 amp controller 5k-0 ohms
HD f&r switch
250 amp selenoid
200 amp fuse
MCOR 4 plus conversion kit.
Yes. He said he had an MCOR on it, so that tells me that it's the new style throttle signal you'll need. As long as they're both series 48 volt cars everything will work fine.
TahoeDawgZ71 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 08-23-2016, 07:33 PM   #22
Gone Wild
 
dannyre's Avatar
Club Car
 
Join Date: Aug 2016
Location: Galveston, Texas
Posts: 421
Default Re: Upgrade Advice

Quote:
Originally Posted by jlutsey View Post
As far as the OBC stud goes, if you go to the toilet section at lowes they sell a bag with two 5/16" brass toilet bolts. Comes with rubber and metal washers and works perfectly. I just cut the head off and put a little heat shrink tubing on the middle part that goes through the controller. It will be about $4.87 and will have two wing nuts with it.

Let me know if someone can varify the compatibility of my parts with your cart...I may be wrong but I think your limiting yourself with the 6ga cables. That is stock size and pretty restrictive. 2ga welding machine cable or Scottys wire kits are the way to go.
2 ga wire is what I have, does this stud work for 2 ga ?
dannyre is offline   Reply With Quote
Unread 08-23-2016, 07:41 PM   #23
Dawg Gone Wild
 
TahoeDawgZ71's Avatar
Club Car
 
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 7,614
Default Re: Upgrade Advice

If it's 2 gauge welding cable and you're making your own, you shouldn't need a stud. I've always been able to get 2 gauge to fit through the hole in the OBC. Just takes a little WD-40
TahoeDawgZ71 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
TXT Upgrade Advice Electric EZGO
Need advice 93 cc ds motor (upgrade?) Electric Club Car
Engine upgrade advice for G16 Big Block Talk!
Looking to upgrade and need advice Lifted Golf Carts
Looking for some advice on a motor upgrade. Electric Club Car


All times are GMT -5. The time now is 07:28 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.