lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
 
Thread Tools Display Modes
Old 08-30-2016, 10:53 AM   #1
Btenney
Not Yet Wild
 
Join Date: Jul 2016
Posts: 43
Default Curtis speed controller 48v

Cart would go fast for a min then slow to a crawl and no reverse
Pulled the controller apart after checking everything twice
Found this burn marks has water inside as well rusted bolts.
But everything seems to check good no blown apart caps or anything
Checked voltage. On the b+ to the m- got 15v. 51v at the bank
Attached Images
File Type: jpg image.jpg (16.9 KB, 0 views)
Btenney is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 08-30-2016, 10:54 AM   #2
Btenney
Not Yet Wild
 
Join Date: Jul 2016
Posts: 43
Default Re: Curtis speed controller 48v

Fixable or junk. I flaked off the loose coating that's why it's all bare
Btenney is offline   Reply With Quote
Old 08-30-2016, 11:26 AM   #3
tag50
Gone Wild
Club Car
 
Join Date: Apr 2014
Location: Oregon City, Or
Posts: 1,977
Default Re: Curtis speed controller 48v

The board is toast. Even if you could get working again, it would be unreliable.


.
tag50 is offline   Reply With Quote
Old 08-30-2016, 12:29 PM   #4
jjance
Gone Wild
 
jjance's Avatar
Club Car
 
Join Date: Feb 2011
Location: Chattanooga TN
Posts: 2,105
Default Re: Curtis speed controller 48v

I'd give it a try if I could identify the defective parts.
jjance is offline   Reply With Quote
Old 08-30-2016, 12:58 PM   #5
Btenney
Not Yet Wild
 
Join Date: Jul 2016
Posts: 43
Default Re: Curtis speed controller 48v

Found the issue the insulator for the b+ wore thru in one spot. Burn marks started there I tested all components everything ohms out other then the burn markings from the b+ strap
Btenney is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car




Similar Threads
Thread Forum
Help with opening a Curtis DCS speed controller Electric EZGO
2001 EZGO / Curtis Speed controller Golf Carts and Parts
Curtis PMC speed controller Golf Carts and Parts
'94 CC with Curtis Controller 1/2 speed Electric Club Car
Curtis 1204-001 Speed Controller, Need Replacement Electric EZGO


All times are GMT -5. The time now is 05:44 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.