|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
08-30-2016, 10:53 AM | #1 |
Not Yet Wild
Join Date: Jul 2016
Posts: 43
|
Curtis speed controller 48v
Cart would go fast for a min then slow to a crawl and no reverse
Pulled the controller apart after checking everything twice Found this burn marks has water inside as well rusted bolts. But everything seems to check good no blown apart caps or anything Checked voltage. On the b+ to the m- got 15v. 51v at the bank |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-30-2016, 10:54 AM | #2 |
Not Yet Wild
Join Date: Jul 2016
Posts: 43
|
Re: Curtis speed controller 48v
Fixable or junk. I flaked off the loose coating that's why it's all bare
|
08-30-2016, 11:26 AM | #3 |
Gone Wild
Join Date: Apr 2014
Location: Oregon City, Or
Posts: 1,977
|
Re: Curtis speed controller 48v
The board is toast. Even if you could get working again, it would be unreliable.
. |
08-30-2016, 12:29 PM | #4 |
Gone Wild
Join Date: Feb 2011
Location: Chattanooga TN
Posts: 2,105
|
Re: Curtis speed controller 48v
I'd give it a try if I could identify the defective parts.
|
08-30-2016, 12:58 PM | #5 |
Not Yet Wild
Join Date: Jul 2016
Posts: 43
|
Re: Curtis speed controller 48v
Found the issue the insulator for the b+ wore thru in one spot. Burn marks started there I tested all components everything ohms out other then the burn markings from the b+ strap
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Help with opening a Curtis DCS speed controller | Electric EZGO | |||
2001 EZGO / Curtis Speed controller | Golf Carts and Parts | |||
Curtis PMC speed controller | Golf Carts and Parts | |||
'94 CC with Curtis Controller 1/2 speed | Electric Club Car | |||
Curtis 1204-001 Speed Controller, Need Replacement | Electric EZGO |