|09-07-2016, 06:46 AM||#1|
Not Yet Wild
Join Date: Nov 2015
Throttle "Problem" With 1995 CCDS 48v Series
It's my understanding that my cart is Pre-MCOR...
So cart goes just fine if accelerator pressed...
BUT, if you let off just a bit, then press full throttle again...
Cart will go faster than originally running at full throttle...
It does this at full charge... after some use... etc etc
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
|09-07-2016, 07:46 AM||#2|
Join Date: Dec 2007
Location: Southern California
Re: Throttle "Problem" With 1995 CCDS 48v Series
The cart has a potentiometer signal device, commonly called the pot. The signal to the speed control is 0-5000(5kΩ).
You can test this signal by removing the 2 small wires from controller pin #2 & 3 and poking the multi-meter test leads into the spade connectors on these 2 wires.
Set the meter to a range of 20,000 Ωs and work the pedal making note of the signal response. You will have the answer to your question.
|My 1995 EZGO Medalist "journal"||Members Rides|
|Alltrax SPM "low throttle" error code||Electric EZGO|
|Difference between the newer and older TXT series "fleet" carts?||Electric EZGO|
|WTB 2 seat "back rest" and braces for CCDS||Golf Carts and Parts|
|Which one is "first in series" of batteries need clarification for hooking up lights||Electric golf carts|