lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 09-14-2016, 04:19 PM   #1
Not Yet Wild
 
Join Date: Jun 2012
Posts: 21
Default Motor Controller techinal question

My motor controller burned up on my 1996 Carryall Serial # F9644-540790.
The burned up motor controller is a Curtis model #1204-412, 48 v 300 amps.
It has the usual terminals A2, B-, B+, M- and push on terminals 1,2 and 3.

When I got the replacement Curtis controller, the replacement has those terminals on it plus an extra push on terminal marked J5 next to the B+ terminal and a 4 wire plug on terminal.

Does anyone know if it will work just using the wires off my old controller and leaving those other terminals empty? If not, what do I connect to those other terminals.

Any help would be greatly appreciated because I need to get it running as soon as possible for work around my barn and the technical support from my place of purchase will not be available for a few days.
tallyho is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 09-14-2016, 04:21 PM   #2
Cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 63,342
Default Re: Motor Controller techinal question

Do you have a model # on the new control?
Sounds like the new control may be sepex
scottyb is offline   Reply With Quote
Unread 09-14-2016, 04:55 PM   #3
Not Yet Wild
 
Join Date: Jun 2012
Posts: 21
Default Re: Motor Controller techinal question

It is Curtis Part # 17720708, model # 1204M-5303. 325 amps.
tallyho is offline   Reply With Quote
Unread 09-14-2016, 05:09 PM   #4
Gone Wild
 
Sergio's Avatar
Club Car
 
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 4,287
Default Re: Motor Controller techinal question

The "M" suffix is the latest programmable version of your old controller.

Did they configure it for You or sent You the configuration information for reference?

That controller can support 9 different throttle types and the J5 connector can be programmed to activate 1/2 speed reverse.

As long as the throttle was configured to match your application, it should work really well.
Sergio is online now   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
AC Motor Controller upgrade question Electric EZGO
EZ-GO Motor and Controller Question Electric EZGO
d&d motor and controller question Electric Club Car
motor/controller question. Electric Yamaha
Torque, Controller, Motor question Electric EZGO


All times are GMT -5. The time now is 02:22 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.