lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
 
Thread Tools Display Modes
Old 09-17-2016, 03:55 PM   #1
JOE14BOW
Not Yet Wild
 
Join Date: May 2015
Posts: 16
Default Front Hub Assembly Replacement - Greasing and Tightness

Replacing both front hub assemblies on my 2009 Precedent electric. I'd like to know what kind and where I need to grease, and how tight (ft lbs) to tighten the center nut. Any advice is appreciated. Thanks
JOE14BOW is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 09-17-2016, 04:43 PM   #2
crash test dummy
Guest
 
Posts: n/a
Default Re: Front Hub Assembly Replacement - Greasing and Tightness

no grease needed

  Reply With Quote
Old 09-17-2016, 04:46 PM   #3
mrgolf
Old Sky Soldier
 
mrgolf's Avatar
Club Car
 
Join Date: Dec 2011
Location: Kentucky
Posts: 3,881
Default Re: Front Hub Assembly Replacement - Greasing and Tightness

They are sealed bearings. No operator lube points. Tighten nut enough to take out play on shaft, do not over tighten and make the hub bind. It should spin freely.


Edit CTD is faster than me.
mrgolf is offline   Reply With Quote
Old 09-17-2016, 04:55 PM   #4
crash test dummy
Guest
 
Posts: n/a
Default Re: Front Hub Assembly Replacement - Greasing and Tightness

it took me 5 min to find and copy that

i now have the manual saved too
  Reply With Quote
Old 09-17-2016, 04:57 PM   #5
Golf cart guy
Gone Wild
 
Golf cart guy's Avatar
 
Join Date: May 2015
Location: Central Florida
Posts: 2,114
Default Re: Front Hub Assembly Replacement - Greasing and Tightness

You however want to make sure the hub does not rock on the shaft-otherwise you will ruin the spindle down the road.
Golf cart guy is offline   Reply With Quote
Old 09-17-2016, 05:01 PM   #6
crash test dummy
Guest
 
Posts: n/a
Default Re: Front Hub Assembly Replacement - Greasing and Tightness

hub install #4
  Reply With Quote
Old 09-19-2016, 09:12 AM   #7
JOE14BOW
Not Yet Wild
 
Join Date: May 2015
Posts: 16
Default Re: Front Hub Assembly Replacement - Greasing and Tightness

Thanks guys!
JOE14BOW is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Axle Assembly - Bearing Replacement Electric EZGO
Help! G2 front Wheel Hub assembly Gas Yamaha
Mcor4 replacement with new pedal assembly Electric Club Car
1987 Marathon Brake assembly needed or replacement part number Gas EZGO
Greasing bearings front bearings/ Bearing Buddies? Gas EZGO


All times are GMT -5. The time now is 07:10 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.