|01-30-2009, 10:34 AM||#1|
Not Yet Wild
Join Date: Jan 2009
I spoke with a guy at cart zone about my 89 cc project and explained what I wanted to do. Essentially lose the v glide and resistors and add a controller and the D395 (Beast) motor. I explained that I didn't need speed and that a lot of the places I ride are so rough that half throttle is plenty fast with just a stock cart. He said that riding at half throttle with the uprgades would cause everything to get too hot. I understand that right now the resistors get too hot doing this, but I don't understand the excessive heat with the controller and new motor. Does this mean that no matter what I do I will essentially be forced to run WOT? I am ignorant about electricity so I will be needing a third grade explanation. Thanks for the help.
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
|01-30-2009, 04:59 PM||#2|
Join Date: Dec 2006
Location: S. E. Mich.
Re: excessive heat?
I converted my 90 to a pot and a 300 amp controller, still running the original 36 volt motor, all it does is get run a low speeds. Have never had an over heating problem.
|harnessing the heat..||Electric EZGO|