Buggies Gone Wild Golf Cart Forum

Buggies Gone Wild Golf Cart Forum (http://www.buggiesgonewild.com/)
-   Electric Club Car (http://www.buggiesgonewild.com/electric-club-car/)
-   -   v-glide potentiometer (http://www.buggiesgonewild.com/electric-club-car/124164-v-glide-potentiometer.html)

dhanscel 10-26-2016 01:05 PM

v-glide potentiometer
 
I am new her to this forum .I have done a lot of reading and i have a question about my 1996 cc. I want to insatall a v-glide potentiometer. I have a 36 volt system with two year old batteries. I have a wiring diagram for a 1992-94 cc. i also have a brand new v-glide for resistor carts at home. Can i convert this v-glide to a potentiometer and then wiring to a solid state controller if i can what terminal on the potentiometer does the black wire coming from it attaches to and also the white wire

scottyb 10-26-2016 01:14 PM

Re: v-glide potentiometer
 
Just to clarify things - a 1996 36v club car is a resistor coil cart. Correct?

dhanscel 10-26-2016 01:41 PM

Re: v-glide potentiometer
 
yes it is

scottyb 10-26-2016 03:14 PM

Re: v-glide potentiometer
 
For clarification - A V-glide and a potentiometer are 2 different things. A V-glide with resistors is a multi-step 'potentiometer' The multi-step is what C used from about 92 to 04 when the mcor (a true pot) replaced the throttle device. There were 2 yrs '95 and '96 when CC used a Curtis type pot, 0-5k in '95 and 5k-0 in '96... just to make things clear.

dhanscel 10-26-2016 03:46 PM

Re: v-glide potentiometer
 
sorry for the wording so can a v-glide with resistors be used as a multi-step potentiometer. my cart has the coil resistors just above the motor i just do not like the coil resistors any other suggestions would be greatly appreciated

scottyb 10-26-2016 04:36 PM

Re: v-glide potentiometer
 
I understand, the resistor coils waste amperage and in some cases present a fire danger.
We have been making a conversion kit for these carts for years. The kit is complete with all you need to go solid state 36 or 48v.

tag50 10-27-2016 12:40 AM

Re: v-glide potentiometer
 
Can you rebuild a V-giide into a multi-step? yes

Should you? no

Scotty's variable pot makes for a much smoother throttle and you won't have to hunt down the resistors for a multi-step. Scotty's conversion kit is a proven system.

The only other thing I'd recommend is an up-grade to the Super-Duty Solenoid (MZJ400) so you have the option to go to 48 volts when those 2 year old batteries give up.

The only reason I haven't gone to 48v. yet is because my 36v. pack still gets me to were I need to go and back.


.

dhanscel 10-31-2016 10:32 PM

Re: v-glide potentiometer
 
I am converting my 96 CC to a multi-step potentiometer witth a 400 amp controller . How can i check to see if the throttle is 5k-0 or 0-5k so i will know what controller to order

tag50 11-01-2016 12:25 AM

Re: v-glide potentiometer
 
How many wires are coming out of this multi-step? I believe the black and white wires will show which throttle signal you'll have when connected to your meter.


.

Sergio 11-01-2016 05:59 AM

Re: v-glide potentiometer
 
This should help on how to wire the VGlide as a "Multi-Step Potentiometer" and the resistors you will need to buy.
http://www.buggiesgonewild.com/elect...ml#post1327737


All times are GMT -5. The time now is 01:37 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.