|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
11-06-2016, 07:39 PM | #1 |
Not Yet Wild
Join Date: Nov 2016
Posts: 1
|
Material for stretching C.C. precedent
I have seen quite a few people stretching their aluminum frame on the club car precedent. I am not sure as far as thickness of the aluminum used to do the stretch and whether c channel or I beam is preferred, I have read about both being used. Also , am I correct in assuming it should be sleeved inside of the existing frame for about ten inches front and back? Any help in this would be greatly appreciated.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-07-2016, 09:27 AM | #2 |
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: Material for stretching C.C. precedent
That is correct. We use a "kit" that includes everything you'd need to do the job.
|
11-08-2016, 03:05 PM | #3 |
Gone Wild
Join Date: Jun 2014
Location: Concord, NC
Posts: 354
|
Re: Material for stretching C.C. precedent
Doing one right now with a kit I got from TahoeDawgZ71, he has been a lot of help!
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Stretching My Precedent! | Electric Club Car | |||
Stretching a G1 | Gas Yamaha | |||
stretching a G9 | Gas Yamaha | |||
Stretching? | Design Center |