|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
02-11-2017, 10:24 PM | #1 |
Gone Wild
Join Date: Feb 2017
Posts: 175
|
Mcor with non programmable controller problems
I have a 2001.5 series ds 48v with a non programmable logisystems 700, my mcor reaches 1100ohms. I tried a momentary jumper switch between green and yellow at the controller during wot and still get 1.1-1.2. Is there a way to reach 0ohms? I would think that a 22-25% reduction in signal at wot is really killing performance. There is a ton of dead time between 7100-5k and I can't even use the 1100-0 I need.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
MCOR 4 problems | Electric Club Car | |||
mcor problems | Electric Club Car | |||
2003 G22E, programmable controller? | Electric Yamaha | |||
Programmable vs Non Programmable Controler | Electric EZGO | |||
is $250 for a 400 Alltrax programmable controller a good deal? | Electric EZGO |