|
|
|||||||
| Electric Club Car Electric DS, and Precedent golf cars |
  |
|
|
Thread Tools | Display Modes |
03-05-2017, 03:04 PM
|
#1 |
|
Gone Wild
Join Date: Dec 2016
Location: Kingsland, Georgia
Posts: 1,825
|
Installed AM293201 today
My cart, s/n A9927-xxxxxx, ran pretty good with the V-glide, but was a bit jumpy at varying speeds. I decided to install the AM293201 kit.
The installation went pretty smooth for these old hands and poor vision. I started to back the cart off the ramps and noticed there was no reverse buzzer initially when I switched to F-R switch. Then it came on and I was able to back off the ramps. However, the solenoid is not energizing every time I press GO, in forward or reverse. When it does energize, the cart runs very smoothly at all speeds, and will continue to run fine as long as I don't let off the pedal. But if I let off the pedal and press it again, nothing happens, just like I am not pressing the pedal. I double checked all of the terminal plugs and connections, but it continues to do the same thing. Any suggestions what to check first? I won't be back at the cart until next weekend, but I'll take your notes with me. |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
03-06-2017, 09:35 AM
|
#2 |
|
revolutiongolfcars.com
 Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: Installed AM293201 today
There's an intermittent component or a bad connection somewhere. Either the micro switch in the mcor4 is bad, the microswitch behind the F&R switch, or the solenoid is more than likely intermittent. You can confirm this with a multi meter. Did you buy the conversion kit from me?
|
|
|
|
|
03-06-2017, 01:57 PM
|
#3 | |
|
Gone Wild
Join Date: Dec 2016
Location: Kingsland, Georgia
Posts: 1,825
|
Re: Installed AM293201 today
Quote:
|
|
|
|
|
|
03-06-2017, 02:00 PM
|
#4 |
|
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: Installed AM293201 today
FYI. We price match if possible.
Sent from my iPhone using Tapatalk |
|
|
|
|
03-06-2017, 03:05 PM
|
#5 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: Installed AM293201 today
Go to so & so to save a couple $ and come to BGW for sponsor help
|
|
|
|
|
03-06-2017, 03:19 PM
|
#6 |
|
Gone Wild
Join Date: Nov 2012
Posts: 197
|
Re: Installed AM293201 today
ouch
|
|
|
|
|
03-06-2017, 03:22 PM
|
#7 | |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: Installed AM293201 today
Quote:
 |
|
|
|
|
|
03-06-2017, 04:23 PM
|
#8 |
|
Just Gone
Join Date: Sep 2015
Location: North Carolina
Posts: 3,549
|
Re: Installed AM293201 today
Ha ha!
 |
|
|
|
|
03-06-2017, 05:24 PM
|
#9 | |
|
Gone Wild
Join Date: Dec 2016
Location: Kingsland, Georgia
Posts: 1,825
|
Re: Installed AM293201 today
Quote:
I'll learn this simple lesson the hard way I guess.  Thank you, Dave, for your help, even though it was a loss leader for you. BTW, I hate paying Georgia state tax!!!  |
|
|
|
|
|
03-06-2017, 05:27 PM
|
#10 |
|
Gone Wild
Join Date: Dec 2016
Location: Kingsland, Georgia
Posts: 1,825
|
Re: Installed AM293201 today
One more thing! I am a limited income, retired, arthritic, old fart.
In the future, please cut me some slack. LOL! |
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| New steering wheel kit installed today | Gas Club Car | |||
| Just installed lift today on g16 | Lifted Golf Carts | |||
| New Batteries Installed Today | Electric Club Car | |||
| Installed my voltage meter from Scotty today | Electric Club Car | |||
| installed lift today | Gas Yamaha | |||
Linear Mode
