|
|
|||||||
| Electric Club Car Electric DS, and Precedent golf cars |
  |
|
|
Thread Tools | Display Modes |
04-27-2017, 05:42 AM
|
#1 |
|
Not Yet Wild
 Join Date: Nov 2016
Posts: 23
|
High pitch "sing" going forward
Working on a 2011 CC Precedent, 48 volt IQ. It had a squeal going forward. My first thought was the bearing. I've narrowed the "singing" down to the springs holding the brushes. Here's my question- should I just replace the springs, or go ahead with brushes also? They still have a lot of meat left. I am going to replace the bearing, since it's already apart.
Thanks for all opinions. |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
04-27-2017, 05:52 AM
|
#2 |
|
Gone Wild
Join Date: Sep 2015
Location: Cincinnati, Ohio
Posts: 1,354
|
Re: High pitch "sing" going forward
If it's apart, you should just replace the brushes too.
|
|
|
|
|
04-27-2017, 12:51 PM
|
#3 |
|
Not Yet Wild
Join Date: Nov 2016
Posts: 23
|
Re: High pitch "sing" going forward
That's what I decided to do, since the motor is already in pieces.
Thx for the response. |
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Precedent project "PIN HIGH" | Members Rides | |||
| "03" ezgo electric 36v PDS drive- only reverse no forward | Electric EZGO | |||
| 93 Marathon"Low power" in forward" | Electric EZGO | |||
| "High Speed Switch" ? | Electric Club Car | |||
| Cart "Stutters" in forward and reverse | Electric Club Car | |||
Linear Mode
