lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 02-18-2009, 09:37 AM   #1
just hangin' around
 
oxfordlawn's Avatar
Club Car
 
Join Date: Jan 2009
Location: Oxford Flo-Rida
Posts: 1,102
Default Spring on splined input shaft for transaxle

My neighbor and I have been doing motor swaps between stock and PQ motors in both our carts. His has a spring on the 10 tooth input shaft that keeps pressure on the armature into the motor, my cart does not. Mine is a 36V(converted to 48V) cart and his is a 48V originally. Is mine supposed to have been there, as I feel this is contributing to a vibration/groan I get while accelerating through a certain speed/resonance. Did my 36 cart ever have one and it disappeared over the years...what is the purpose of this spring?? I don't see it in the service manual anywhere.
oxfordlawn is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 02-18-2009, 02:30 PM   #2
Gone Wild
E-Z-GO
 
Join Date: Dec 2008
Location: Liberty Lake, WA
Posts: 479
Default Re: Spring on splined input shaft for transaxle

I just did work on my '96 48V and there was no spring either. The only reason I can see for the spring would be to prevent the armature from sliding farther onto the spline. Does your motor shaft have a plastic groved piece at the end of the motor roter?. This got worn on my 96 and was causing a "clicking" sound on deexeleration. You need Lockman, Morrison or Scotty B to answer for sure.
dcannow is offline   Reply With Quote
Unread 02-19-2009, 07:41 AM   #3
just leave me alone
 
GLEEMO's Avatar
Club Car
 
Join Date: Aug 2008
Location: Tennessee
Posts: 5,643
Default Re: Spring on splined input shaft for transaxle

Yo Oxfordlawn I dont know the answer to your ?
But I know who does, "PQ" , if you can get off the phone with them after U call .
Man he is a talker !
GLEEMO is offline   Reply With Quote
Unread 02-19-2009, 07:48 AM   #4
just hangin' around
 
oxfordlawn's Avatar
Club Car
 
Join Date: Jan 2009
Location: Oxford Flo-Rida
Posts: 1,102
Default Re: Spring on splined input shaft for transaxle

LOL--Robby can talk--no doubt about that I actually feel bad and try to end the conversation, but he has sooo much good info to share. GMorrison you are right and I didnt think about that, I just shipped 2 motors to them so they will be calling on Friday to discuss options, I will ask then.
DUH! sometimes the answer is so obvious you cant see it
oxfordlawn is offline   Reply With Quote
Unread 02-19-2009, 08:10 AM   #5
just leave me alone
 
GLEEMO's Avatar
Club Car
 
Join Date: Aug 2008
Location: Tennessee
Posts: 5,643
Default Re: Spring on splined input shaft for transaxle

Yeah but some times you get 10 answers which drives me crazy.
they need a table which is like OK
Pick 1 from Column 1. , then Pick one from Col 2. and it keeps limiting
your choices as U work down.
Toooo many options
GLEEMO is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Input shaft Electric EZGO
Input Shaft question Electric EZGO
Transmission Input Shaft Replacement Gas Yamaha
94-up ez go transaxle [posi] Golf Carts and Parts
98 Carryall 2 Transaxle Lifted Golf Carts


All times are GMT -5. The time now is 10:59 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.