lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
 
Thread Tools Display Modes
Old 05-02-2017, 11:20 AM   #1
thetoddjohnson
Gone Wild
 
thetoddjohnson's Avatar
 
Join Date: Jun 2013
Location: Seattle
Posts: 522
Default FSIP to Alltrax jumper mapping?

Hi all,

I'm removing a FSIP 1204-408 and replacing it with an Alltrax SR48500.

Since the Alltrax doesn't have an A2 lug, I simply used a single wire to connect the A2 post on the motor directly to the FNR switch. Can I get an Amen on that?

Also, I need help determining where to put the little wires. I've labeled the jumpers on the attached picture J1, J2, and J3. I'm assuming one of them goes to what is listed as "THROT 1" in the Alltrax manual. I'm assuming another one goes to "THROT 2", and I'm assuming the last one goes to either the black, blue, green, or red ports. Does anybody know what goes where?

Thanks,

TJ
Attached Images
File Type: jpg old controller.jpg (321.2 KB, 0 views)
File Type: jpg SR owners manual.jpg (385.4 KB, 0 views)
thetoddjohnson is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 05-02-2017, 12:25 PM   #2
scottyb
Happy Carting
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 73,344
Default Re: FSIP to Alltrax jumper mapping?

What cart is this going in? Ezgo TXT ?
Follow the install instruction - A2 has been used since the 90s - LOL, so one cable does replace those 2.... bypassing the controller A2 terminal.
scottyb is offline   Reply With Quote
Old 05-02-2017, 02:44 PM   #3
thetoddjohnson
Gone Wild
 
thetoddjohnson's Avatar
 
Join Date: Jun 2013
Location: Seattle
Posts: 522
Default Re: FSIP to Alltrax jumper mapping?

Going in a '94 DS.

I'm good. I had to call Alltrax about an XCT for a G29, so I asked about the wiring for this cart as well and I got that straightened out.

Thanks,

TJ
thetoddjohnson is offline   Reply With Quote
Old 05-02-2017, 04:31 PM   #4
scottyb
Happy Carting
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 73,344
Default Re: FSIP to Alltrax jumper mapping?

Pretty straight forward , huh?
scottyb is offline   Reply With Quote
Old 05-02-2017, 06:33 PM   #5
thetoddjohnson
Gone Wild
 
thetoddjohnson's Avatar
 
Join Date: Jun 2013
Location: Seattle
Posts: 522
Default Re: FSIP to Alltrax jumper mapping?

Yeah. Although the mounting location of the DS controller makes it a PIA to make the connections.
thetoddjohnson is offline   Reply With Quote
Old 05-02-2017, 07:20 PM   #6
scottyb
Happy Carting
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 73,344
Default Re: FSIP to Alltrax jumper mapping?

Yeah! What was CC thinking with that decision ....

I mean - what's up with hiding the main controller in the least accessible spot !?
scottyb is offline   Reply With Quote
Old 05-02-2017, 08:51 PM   #7
thetoddjohnson
Gone Wild
 
thetoddjohnson's Avatar
 
Join Date: Jun 2013
Location: Seattle
Posts: 522
Default Re: FSIP to Alltrax jumper mapping?

I must have done something wrong. Solenoid clicks but the cart will not go. I installed the FN1 function knob, but didn't bother to hook up a computer. I assumed it would just have some defaults programmed. Perhaps the default is "ultimate child mode" where the cart doesn't move. hahahah.
thetoddjohnson is offline   Reply With Quote
Old 05-02-2017, 09:08 PM   #8
TahoeDawgZ71
revolutiongolfcars.com
 
TahoeDawgZ71's Avatar
Club Car
 
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
Default Re: FSIP to Alltrax jumper mapping?

Quote:
Originally Posted by thetoddjohnson View Post
I must have done something wrong. Solenoid clicks but the cart will not go. I installed the FN1 function knob, but didn't bother to hook up a computer. I assumed it would just have some defaults programmed. Perhaps the default is "ultimate child mode" where the cart doesn't move. hahahah.
If you get time, call me tomorrow and I'll help you with it. Just now saw where you were having issues. You should have called me today.
TahoeDawgZ71 is offline   Reply With Quote
Old 05-03-2017, 05:59 AM   #9
Sergio
Gone Wild
 
Sergio's Avatar
Club Car
 
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
Default Re: FSIP to Alltrax jumper mapping?

Check the Throttle wires, Green to J4 and Yellow to J5.
Sergio is offline   Reply With Quote
Old 05-03-2017, 06:21 AM   #10
thetoddjohnson
Gone Wild
 
thetoddjohnson's Avatar
 
Join Date: Jun 2013
Location: Seattle
Posts: 522
Default Re: FSIP to Alltrax jumper mapping?

Quote:
Originally Posted by TahoeDawgZ71 View Post
If you get time, call me tomorrow and I'll help you with it. Just now saw where you were having issues. You should have called me today.
thetoddjohnson is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Mapping Alltrax SPM400 Electric EZGO
FSIP or Alltrax SPM Electric Club Car
field mapping Electric EZGO
Alltrax vs FSIP (GE) both 700 amps Extreme DC!
FSIP OR ALLTRAX 500 amp controller Lifted Golf Carts


All times are GMT -5. The time now is 10:42 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.