lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
 
Thread Tools Display Modes
Old 05-18-2017, 04:12 PM   #1
wdbill
Not Yet Wild
 
Join Date: Mar 2017
Posts: 8
Default Solid state installation problems questions

I have a 1984 club car ds that is in the process of a solid state conversion. I bought a conversion kit from the classifieds that had the solenoid, pedal linkage assembly, and a fsip controller. I got the instructions from scotty that are for an Alltrax controller, I've got it connected as close to the drawing as I can as the controller doesn't have all the terminals that the Alltrax has. When I hook up the negative and shift cart into forward or reverse it accelerates immediately. If anyone has installed this controller and has some pointers, tips, instructions I would greatly appreciate it. I'll get some pictures posted soon of what I have wired up.
wdbill is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 05-18-2017, 05:23 PM   #2
scottyb
Happy Carting
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
Default Re: Solid state installation problems questions

You should be working with this diagram.... if yes how is your FSIP controller different?
Attached Images
File Type: jpg Club Car Series cable numbers.jpg (177.9 KB, 0 views)
scottyb is offline   Reply With Quote
Old 05-18-2017, 05:56 PM   #3
wdbill
Not Yet Wild
 
Join Date: Mar 2017
Posts: 8
Default Re: Solid state installation problems questions

Ok ill use that one to check/ move any wires, I didnt specify what controller I was getting when I sent you the email, I assumed I was getting the one advertised on carts unlimited. Been going off an Alltrax diagram.
wdbill is offline   Reply With Quote
Old 05-19-2017, 12:46 AM   #4
scottyb
Happy Carting
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
Default Re: Solid state installation problems questions

Quote:
Originally Posted by wdbill View Post
Ok ill use that one to check/ move any wires, I didnt specify what controller I was getting when I sent you the email, I assumed I was getting the one advertised on carts unlimited. Been going off an Alltrax diagram.
The cart MUST be wired exactly as my diagram without exception.
scottyb is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
36v CC to 48V solid state Electric Club Car
Problems during solid state conversion Electric Club Car
Solid State Conversion Questions Electric Yamaha
resistor to solid state Electric Club Car
What does solid state mean Electric Club Car


All times are GMT -5. The time now is 03:08 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.