DS 36v vglide

wedge542

can someone show me where term a1 is on a 36v club car motor,mine has 4 terminals but not like whats in the wire diagrams here,the trans on one end and wires on the other end,one term seems a little further away than the others.i need to run a wire from my controller pos to the a1 on the motor.The diagram here dont show the trans end only some kinda band around the motor.

BGW

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

crash test dummy

wrong diagram

wedge542

mines not like that,all terminals are in a row but one looks to be further apart than the other 3 and its at the top most part of the motor.

crash test dummy

what year is the cart ?

crash test dummy

this is my carts (93) motor

wedge542

I think thats it but according to the diagram here there is no wires from the batt to the motor at all? looks like two wires go to the controler and two to the f r switch area

Sergio

That is correct for the 36v Controller cart:

http://www.buggiesgonewild.com/attac...ire_vglide.jpg

wedge542

Well,looks like my old curtis controller fixed this problem ive had awhile now, alltrax was no help,saying need to replace no fixing this so guess i got that one in a million bad alltrax controller.