|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
02-22-2009, 07:25 PM | #1 |
Gone Wild
Join Date: Jun 2008
Location: Texas Hill Country
Posts: 397
|
Pulling steering column instead of wheel??
Got a problem. The steering wheel on my 91 CC DS is stuck and I wanted to know if the column can be unbolted from the linkage under the dash and the entire shaft pulled then reinstalled to allow me to install my new dash?
The wheel is to the point it will need to be cut off and I do not want to replace it right now. Even took the cart to Club Car and they tried everything they could and just came to same conclusion I did.. The big boy trying to get it off said that he had never had one that bad. Thanks for any help |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-22-2009, 07:39 PM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: Pulling steering column instead of wheel??
Did they have the factory puller ??????
|
02-22-2009, 07:44 PM | #3 |
Gone Wild
Join Date: Jun 2008
Location: Texas Hill Country
Posts: 397
|
Re: Pulling steering column instead of wheel??
They had all different kind of them (stock) and even ones that the mechanic had made and not one that would grab the bottom of the wheel without damaging the inner portion of the wheel. The mechanic even tried using an air hammer while pulling the wheel and it didn't budge.
|
02-22-2009, 07:48 PM | #4 |
Gone Wild
Join Date: Jun 2008
Location: Texas Hill Country
Posts: 397
|
Re: Pulling steering column instead of wheel??
The CC mechanic did say that there might be a chance to build a really wide puller that might grab the bottom of the and just miss the inner side but said that there was not much clearance.
|
02-22-2009, 07:50 PM | #5 |
**** guzzler
Join Date: Dec 2006
Location: S. E. Mich.
Posts: 730
|
Re: Pulling steering column instead of wheel??
Pb blaster or something similiar, soak it for a few days, never saw one yet that wouldn't come off sooner or later. Ya gotta be persistent.
|
02-22-2009, 07:54 PM | #6 |
Gone Wild
Join Date: Jun 2008
Location: Texas Hill Country
Posts: 397
|
Re: Pulling steering column instead of wheel??
Yeah, sounds like I just need to spray that sucker and let her sit for a while.
Plus I'm gonna build a pulley of my own with my welder and some good metal. Just wanted to put my new wood-grain dash on and what a pain. |
02-22-2009, 07:58 PM | #7 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: Pulling steering column instead of wheel??
I just went thru this with my '89 CC .... It wouldn't come off and it had the new style wheel on it .... is that what you have?
|
02-22-2009, 08:02 PM | #8 |
Gone Wild
Join Date: Jun 2008
Location: Texas Hill Country
Posts: 397
|
Re: Pulling steering column instead of wheel??
|
02-22-2009, 08:05 PM | #9 |
Gone Wild
Join Date: Jun 2008
Location: Texas Hill Country
Posts: 397
|
Re: Pulling steering column instead of wheel??
The really weird part was that the CC guy's had not seen a wheel that had a solid section of plastic like what I have. The owner was an older gent and I bet they had 100+ old CC's sitting around the lot.
Should have seen them trying to pull the score card clip piece off. I was laughing and showed them that they needed to remove the two screws on the bottom side and then it popped right off from the wheel. |
02-22-2009, 08:12 PM | #10 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: Pulling steering column instead of wheel??
Okay that is a new style wheel and those guys haven't a clue
I just pulled one ..... CC sells the puller for like 180 dollars so I made one just old conc steel stakes 1/4x1 1/2 and some bolts......I will post some picks but here is how I got started....I believe in PB Blaster But spraying it on and watching it run off is not good enough I cut a 1/2 inch strip of cotton cloth and wrapped it around the shaft above the steering wheel and sprayed every day for a week while I worked on other stuff ..... Your time frame may differ........ I will post pics of the puller I made while you go get this started..... |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Wanted: steering column for a 1992 ezgo | Golf Carts and Parts | |||
move steering column. | Lifted Golf Carts | |||
steering column components... damaged? | Electric Club Car | |||
steering column cover | Gas EZGO | |||
convert a tiller type steering to regular steering column | Gas Harley Davidson |