2007 Precedent Park Brake not locking

krit76

I have a 2007 club car precedent and the park brake bo longer "locks in the braked position"... it worked one day, the next it didnt, no gradual fail. Any ideas where to start?

BGW

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

mrgolf

Spring broke??

PingEye3

Most likely you are going to need one or both of two parts from the attached pdf. They would be items #6 and #12 from the sheet. You can get them from David Hicks at http://www.revolutiongolfcars.com/?lightbox=image_18i9
While you have the pedal assembly out, lube all moving parts. Also attached is the full CC parts manual for your cart.

Attached Files

	Club-Car 2006 PM Pg 4-12.pdf (2.88 MB, 0 views)
	2006 Precedent Parts Catalog - Part1.pdf (4.42 MB, 0 views)
	2006 Precedent Parts Catalog - Part2.pdf (6.63 MB, 0 views)

TahoeDawgZ71

The spring is still available, but item #12 has been discontinued. Lately, I've been replacing these with used Gen2 pedal assemblies. I've got access to some from Club Car's used car department down the street. I've been taking them apart, cleaning them, installing a new MCOR4 with adapter, and replacing old Gen1 pedals with them. They're a direct drop in replacement.

krit76

What does the used gen 2 replacement cost?

TahoeDawgZ71

Contact me privately and we'll discuss.

Jdex420

I have replaced the pawl assembly and am still have an issue with the park brake not locking in. Any help is appreciated. I’m wondering if a new pedal assembly for an 09 will fit and what would be needed to update the accelerator.

Fairtax4me

Call that dude that made the post directly before yours, David Hicks. He’ll get you set up with what you need.

TahoeDawgZ71

The Gen 2 pedal assembly is a direct drop-in for the Gen 1 unit. It comes with an MCOR2 adapter plate and drive-bar adapter as well. An MCOR upgrade is not necessary, as your original MCOR2 will swap over to the gen2 assembly. As mentioned above, if you'll call me, I'll help you out with this.

Jdex420

Awesome. I’ll hit you up Monday. I was trying to message you directly but I’m to new. Thanks for the help!