Access panel

Toolmaker Bob

In the bag well of my 2009 Club Car there is an access panel that is held in place by 2 "plastic" pins. How do I remove these pins so that I can take off the access panel? Once this panel is removed I can get to the motor.

BGW

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

smokey tennis shoe

Some of them on a precedent : Look real close at the round pins in the middle. There should me a groove that you can stick the tip of a small straight blade screwdriver partially in, and then you can wedge the pin out a ways. Once the pin is pulled out a ways, you should be able to grab the entire round pin and pin retainer, and pull the entire thing out. Pretty easy if you try it.

Look for the groove, it should be there , unless someone has put some other piece in there.

NoleFan4Ever

Not sure if it is a DS, but on mine that is just a protective plastic cover. Once removed, it is just the body. There is the access panel above that and it rolls over the transition. It has a couple of phillips head screws in it. That one can be removed and provides access to the top of the motor and the controller/solenoid area.

Toolmaker Bob

Smokey Tennis Shoe, You were right. Mine didn't have a groove in the head but I was able to grab the head with my pliers and pulled the pins out. When I removed the panel there was my motor like I thought. Thank you for your help.

crash test dummy

2009




sorry i was late

Toolmaker Bob

Crash Test Dummy, Thanks for the pictures. Mine is a Precedent with the rivets. I didn't want to pull on them until I knew what they are.