lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 01-17-2018, 06:20 PM   #1
Not Yet Wild
Club Car
 
Join Date: Apr 2017
Location: Missouri
Posts: 9
Default Make your own FN1 for SR Controller

Has anyone made their own "Personality" FN1 box? Looks like a simple 5K POT with 2 wires. With all the DIYer's out there, this would seem like a common project. Am I missing something here?
Kelmat is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 01-17-2018, 09:22 PM   #2
Gone Wild
 
Htownblue's Avatar
Club Car
 
Join Date: May 2015
Location: Houston
Posts: 788
Default Re: Make your own FN1 for SR Controller

For what type of cart? A Precedent seemingly would be super simple as the FNR Switch seems to just complete a circuit with no true consideration for the need to handle or carry a heavy amperage load. As long as the system could support 48V conductivity, a percedent custom switch would seemingly be a easy 1 off project.

Yet another reason DS’s are harder to customize.....hahahaha.....I kid.
Htownblue is offline   Reply With Quote
Unread 01-18-2018, 08:30 PM   #3
Not Yet Wild
Club Car
 
Join Date: Apr 2017
Location: Missouri
Posts: 9
Default Re: Make your own FN1 for SR Controller

You're asking the right questions and making me question my plan... It's a 48 volt 1996 DS Club Car. From what I can see (on-line), the FN1 is pretty a simple diy project. I plan to build my version one this weekend. I'll have first-hand information to share by Sunday evening.
Kelmat is offline   Reply With Quote
Unread 01-18-2018, 09:03 PM   #4
Gone Wild
 
Htownblue's Avatar
Club Car
 
Join Date: May 2015
Location: Houston
Posts: 788
Default Re: Make your own FN1 for SR Controller

Quote:
Originally Posted by Kelmat View Post
You're asking the right questions and making me question my plan... It's a 48 volt 1996 DS Club Car. From what I can see (on-line), the FN1 is pretty a simple diy project. I plan to build my version one this weekend. I'll have first-hand information to share by Sunday evening.
Definitely post what you find with details.
Htownblue is offline   Reply With Quote
Unread 01-20-2018, 05:48 PM   #5
Not Yet Wild
Club Car
 
Join Date: Apr 2017
Location: Missouri
Posts: 9
Default Re: Make your own FN1 for SR Controller

My homemade FN1 worked perfectly.

The POT has 3 small spades marked with 1,2,3
I connected the Black wire to green spade on controller, and #2 on the POT. The Red wire to the Red spade on controller and to #3 on the POT. I had to make a little Y connection as, I didn't have a double spade connector for the Red spade on the controller, which already has a wire connected to it. (Key Switch).

I set the parameters in the program so that with the knob fully CCW I'm at half speed. Fully CW I'm at 100%
Kelmat is offline   Reply With Quote
Unread 01-20-2018, 08:23 PM   #6
Gone Wild
 
Htownblue's Avatar
Club Car
 
Join Date: May 2015
Location: Houston
Posts: 788
Default Re: Make your own FN1 for SR Controller

Quote:
Originally Posted by Kelmat View Post
My homemade FN1 worked perfectly.

The POT has 3 small spades marked with 1,2,3
I connected the Black wire to green spade on controller, and #2 on the POT. The Red wire to the Red spade on controller and to #3 on the POT. I had to make a little Y connection as, I didn't have a double spade connector for the Red spade on the controller, which already has a wire connected to it. (Key Switch).

I set the parameters in the program so that with the knob fully CCW I'm at half speed. Fully CW I'm at 100%
Post some pics man. Interested.
Htownblue is offline   Reply With Quote
Unread 01-28-2018, 10:45 AM   #7
Not Yet Wild
Club Car
 
Join Date: Apr 2017
Location: Missouri
Posts: 9
Default Re: Make your own FN1 for SR Controller

Link to pics

[URL="http://www.buggiesgonewild.com/album.php?albumid=4200"]http://www.buggiesgonewild.com/album.php?
Kelmat is offline   Reply With Quote
Unread 01-28-2018, 06:46 PM   #8
Not Yet Wild
Club Car
 
Join Date: Apr 2017
Location: Missouri
Posts: 9
Default Re: Make your own FN1 for SR Controller

Link to pics:

http://www.buggiesgonewild.com/album.php?albumid=4200
Kelmat is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Does anybody make..... Members Rides
will a 200/800peak solenoid make a differance on a Alltrax 4844 controller Electric EZGO
A Little Make Over Members Rides
Make your own!! Electric Club Car
Make an offer!! Golf Carts and Parts


All times are GMT -5. The time now is 07:01 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.