|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
01-27-2018, 11:49 AM | #1 |
Gone Wild
Join Date: Jun 2017
Location: Savannah, GA
Posts: 6,539
|
Club Car DS motor VERY stuck
Hi everyone, I have a 2004 IQ DS that was in a flood, and the motor is done. It's a GE motor, if that matters.
I tried to remove the motor, and of course the housing came off the armature, and the armature is stuck to the spline. I took the whole rear end out of the car, flipped the brake drum over, and dropped it repeatedly, but the old armature still remains on the spline. What can I do from here? Thanks, Luke |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-27-2018, 01:01 PM | #2 |
Cave Dweller
Join Date: Apr 2013
Location: Always On The Move
Posts: 22,232
|
Re: Club Car DS motor VERY stuck
have you soaked it in PB Blaster , if not I would start with that or something like it and then return to the dropping
|
01-27-2018, 01:53 PM | #3 |
Gone Wild
Join Date: Jun 2017
Location: Savannah, GA
Posts: 6,539
|
Re: Club Car DS motor VERY stuck
|
01-27-2018, 05:40 PM | #4 |
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: Club Car DS motor VERY stuck
This will work. Make sure to either remove all of the lug studs or take an old brake drum and turn it around backwards to make sure you don't damage the studs.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
07 club car with GE motor magnet stuck | Electric Club Car | |||
stuck motor | Electric EZGO | |||
motor stuck | Electric Club Car | |||
'08 TXT motor stuck | Electric EZGO | |||
Stuck motor | Electric Club Car |