Hydrolink system

william h

I crushed the coupler both the male and female part ( dont ask how) anyone know where i can buy a replacement coupler? Iam not having much luck finding both parts

BGW

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Muddog

Go to the hardware store and get quick disconnects for garden hose.
https://www.homedepot.com/p/Melnor-Q...-337/100659513
You"ll also need hose ends, if you have 1/4 inch tubing you can make 3/8 hose ends work.
Put the tubing in hot water for a minute or 2 to soften tubing. you can work it over the hose end.

william h

Thanks guess i was making more of it than it is. Thought it was something special

Muddog

I don't know if you can buy parts for hydrolink, but I do know this is the least costly way to go.
They think a lot of their stuff. For only $95, you can buy 5 or 6 feet of poly tubing($2 at my local store), a primer bulb for outboard motor($6) and their proprietary fitting($87).
https://www.grainger.com/category/pa.../N-a4xZ1yzbumt
In all fairness, I have seen it cheaper, but still at not I would consider a fair price.

william h

Ive been able to find that part with no problem, but the male par of the coupler seems non existent

william h

is there a way to splice the hydro link snake hose/

rib33024

Something like this would work

https://www.homedepot.com/p/Quick-Co...3030/100118014

https://www.homedepot.com/p/Watts-Qu...3031/202257687


https://www.walmart.com/ip/6-Tube-Si...&wl13=&veh=sem

william h

the tubing between batts is only .5 diameter i was thinking a piece of small fuel line and a couple of barbed fittings ?

Htownblue

That tubing is nothing more than a very thin corrugated PVC line. Very thin. You can try a barbed fitting to couple it, but do not be surprised if it isn’t a successful fix as the material isn’t the same as most tubing.

william h

just found this place powRparts.com they have all the replacement parts for trojan hydrolink and flow rite hose, swivels, couplers etc at very reasonable prices. hopefully this is of help to anyone else needing parts for watering systems